Led Status - Bosch FLEXIDOME IP starlight 8000i Series Installation Manual

FLEXIDOME IP starlight 8000i
4.
Notice!
Use full size SD cards for maximum reliability, and to eliminate the risk of bad connections in
a microSD to full size SD adapter. Bosch recommends the use of industrial SD cards with
health monitoring.
5.4

LED status

A status LED can be seen in the camera bubble on the opposite side of the camera lens.
Refer to the table below for the different status LED functions.
Status LED
Solid red
Flashing red
Solid green
Flashing green
Disable the status LED in the camera settings, if necessary.
1.
2.
3.
Bosch Security Systems B.V.
Make sure that all necessary wiring is done, and that energy is being supplied.
Select Camera.
Select Installer menu.
Select Camera LED.
Meaning
Booting
Resetting
Working, but stream is not being watched or
recorded
Stream is being watched and/or recorded
Installation manual
Hardware installation | en
2019.07 | 02 |
27