Headset Charging; Status Led Indicators; Factory Reset - HyperX Cloud MIX HX-HSCAM-GM/EM User Manual

Headset charging

When the headset is connected to a charger with the USB charge cable, the status LED will indicate
the charge status. The headset will take approximately 3 hours to charge fully.
Status LED
Solid red
Off

Status LED indicators

The status LED on the headset indicates the current state of the headset.
Status LED
Flash blue every 5 seconds
Flash blue every 2 seconds
Pairing mode

Factory reset

Factory reset
To perform a factory reset on the headset, hold the power button
for 7 seconds. The status LED will flash blue 5 times and light up red for 1 second. The headset will
turn off automatically.
Document No. 480HX-HSCAM.A01
Charging status Charging status
Charging Charging
Fully charged
Headset status
Connected to a device
Not connected to a device
Flashing red and blue
Flash blue 5 times and light up red for 1 second
TM
HyperX Cloud MIX
and volume up button together
Page 9 of 9