Troubleshooting - Sony FD Trinitron KV-29CL10K Instruction Manual

Troubleshooting

Here are some simple solutions to the problems which may affect the picture and sound.
Problem
No picture (screen is dark) and no
sound.
Poor or no picture (screen is dark),
but good sound.
No picture or no menu information
from equipment connected to the
Scart connector.
Good picture, no sound.
No colour on colour programmes.
Distorted picture when changing
programmes or selecting teletext.
Wrong characters appear when
viewing teletext.
Picture slanted
Noisy picture when viewing a TV
channel.
No unscrambled picture whilst
viewing un unscrambled channel
with a decoder connected through
:2/q
the Scart connector
Remote control does not function.
The standby indicator
flashes.
If you continue to experience problems, have your TV serviced by qualified personnel.
Never open the casing yourself.
Solution
• Check the aerial connection.
• Plug the TV in and press the
the TV.
• If the standby indicator
the remote control.
• Using the menu system, select the "Picture
Adjustment" menu and select "Reset" to return to the
factory settings (see page 10).
• Check that the optional equipment is on and press the
button repeatedly on the remote control until the
correct input symbol is displayed on the screen (see
page 19).
• Press the
• Check that "TV Speakers" is "On" on the "Sound
Adjustment" menu (see page 11).
Check that headphones are not connected.
•
• Using the menu system, select the "Picture
Adjustment" menu and select "Reset" to return to
factory settings (see page 10).
• Turn off any equipment connected to the Scart
connector on the rear of the TV.
• Using the menu system, enter to the "Language/
Country" (see page 12) menu and select the country in
which you operate the TV set. For Cyrillic languages,
we recommend selecting Russia country if your own
country does not appear in the list.
• Using the menu system, select the "Picture Rotation"
option in the "Detail Set Up" menu to correct the
picture slant (see page 16).
• Using the menu system, select the "Manual
Programme Preset" menu and adjust Fine Tuning
(AFT) to obtain better picture reception (see page 14).
• Using the menu system, select the "Noise Reduction"
option in the "Detail Set Up" menu and select
"Auto" to reduce the noise in the picture (see page 15).
• Using the menu system, select the "Set Up" menu.
Then enter to "Detail Set Up" option and set "AV2
Output" to "TV" (see page 15).
.
• Replace the batteries.
on the TV • Contact your nearest Sony service centre.
button on the front of
is on, press
+ button on the remote control.
Additional Information
button on
GB
21