Ex-Or QuickSet Pro Programming Instructions

QuickSet Pro
Programming Instructions
(for MS, MLS and CDH/W products only)
The QuickSet Pro digital programmer handset is
designed for use with Ex-Or's range of lighting control
products. The programmable parameters of the
various products can be configured via this battery-
powered, hand-held, infrared unit. The Quickset
Pro allows programming and re-programming to
be carried out with virtually no disturbance to the
building's occupants. Settings are chosen from the
QuickSet Pro menu and transferred instantaneously
to the product being programmed by pressing
the upload button. The commissioning engineer
receives positive feedback at all stages of the
CONTENTS:
1 x QuickSet Pro, 4x AA Batteries, 1 x USB Lead
FIG. 1
USB
Lead
FIG. 3
Up Key
Page Down
Upload
OK
Left Key
Right Key
Alkaline Cells
QuickSet Pro
Micro SD
Card
USB Port
Option
Download
Press any key to start
Down Key
process. Settings from one product can be copied
in seconds to another and settings can be checked
at any time using the QuickSet Pro's download
function. Reprogramming of the parameters can
be carried out quickly using the QuickSet Pro.
The QuickSet Pro can be easily upgraded to
accommodate product revisions/additions via
USB connection to the PC software package.
(Refer to back page)
FIG. 2
Insert Batteries