Alarm.Com Skybell HD Edition Quick Start Card

Wi-fi doorbell camera

Download this manual

Alarm.com Wi-Fi Doorbell Camera

• Before you begin, go through the Pre-Installation Checklist at:

alarm.com/doorbellinfo

• Install the doorbell camera hardware, replacing the existing

doorbell. Detailed instructions are available at:

alarm.com/doorbellinfo

• Download the Alarm.com Customer App from the App Store

or Google Play and log in using customer credentials.

(Doorbells installed using the Skybell App will not work

with Alarm.com.)

• Go to the Doorbell Camera section of the app and follow the

guided setup to Add a New Device. (The customer account

must have a service plan with the Doorbell Camera enabled.)

Contact Alarm.com Dealer Support at support@alarm.com or find your

local number at the following website: www.alarm.com/dealersupport

US and Canada: 1.866.834.0470 | MX: 001.855.300.9897

Skybell® HD Edition

Questions?

Need help?

Do you have a question about the Skybell HD Edition and is the answer not in the manual?

Page 1 • Install the doorbell camera hardware, replacing the existing doorbell. Detailed instructions are available at: alarm.com/doorbellinfo • Download the Alarm.com Customer App from the App Store or Google Play and log in using customer credentials. (Doorbells installed using the Skybell App will not work with Alarm.com.)
Page 2 Alarm.com Wi-Fi Doorbell Camera LED Reference Guide RED / BLUE – alternating flash ....Doorbell Camera is charging YELLOW – solid (not flashing) ....System booting Entering access point mode, release and wait GREEN – rapid strobe flash ....for green/red LED before syncing the camera (about one minute) RED/GREEN –...