19. Delicates Wash Agitate Time
"dAg"
This option allows the user to set the amount of wash
agitate time for the Delicates cycle.
How to Program Delicates Wash Agitate Time
1. Control must be in Special Mode. Refer to Section
VII.
2. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. Programmable option number
one, "SIg", will appear in the VFD. See Figure 58.
WASH
RINSE
PRICE
TIME REMAINING
INSERT COINS
Figure 58
3. Press the DELICATES (+) pad or the COLD (–)
pad to scroll through the programmable options
until "dAg" appears in the VFD. See Figure 59.
WASH
RINSE
PRICE
TIME REMAINING
INSERT COINS
Figure 59
4. When "dAg" appears in the VFD, press the PERM
PRESS pad. The current number of minutes set for
the Delicates Wash Agitate Time will appear in the
VFD.
42
SOAK
SPIN
UNBALANCE
C105IE1A
SOAK
SPIN
UNBALANCE
C737IE1A
5. Press the DELICATES (+) or the COLD (–) keypad
to increase or decrease the current number of
minutes displayed in the VFD to the desired
number of minutes. See Figure 60.
NOTE: The Delicates Wash Agitate Time can be set
from one (1) to 15 minutes.
Press this pad (enter)
to choose a selected
value or option
NORMAL
HOT
Figure 60
6. Press the PERM PRESS (enter) keypad when the
correct number of minutes appears in the VFD. The
next option, "drg", will appear in the VFD.
NOTE: To program "drg" (Delicates Rinse Agitate
Time), see option 20. To program other options,
refer to the appropriate section.
How to Exit Programming Feature
1. Be sure service door has been opened and closed.
Refer to Section VI.
2. Be sure the control shows a programmable option,
not a value.
3. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. The control will revert back to
the default mode. See Figure 2.
Press this pad (+)
to scroll forward or
increase a value
PERM
DELICATES
PRESS
WARM
COLD
Press this pad (-)
to scroll back or
decrease a value
C106IE1A
800000
Need help?
Do you have a question about the HWF561 and is the answer not in the manual?
Questions and answers