Setting An Alarm - Withings Pulse HR Installation And Operating Instructions Manual

Setting an alarm

Enabling the alarm
In order to enable and set an alarm, perform the following steps:
1. Open the Health Mate app.
2. Go to Devices.
3. Go to Pulse HR > Alarm.
4. Place Pulse HR close enough to your mobile device.
5. Tap and slide the wake-up time up or down to select the alarm time.
6. If necessary, select a Smart Wake-up time when setting an alarm.
Your tracker will then find the best moment to wake you up during that time
period to make for a smoother wake-up experience.
7. Tap OK.
Pulse HR
v1.0 | November, 2018
EN - 37