Ricoh Pro 8300S Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Ricoh Manuals
  4. Printer
  5. Pro 8300S
  6. Operating instructions manual

Ricoh Pro 8300S Operating Instructions Manual

Tcru/oru
Hide thumbs Also See for Pro 8300S:
Table of Contents

Advertisement

Quick Links

See also: Operating Instructions Manual
Operating Instructions
Adjustment Item Menu Guide: TCRU/ORU
For safe and correct use, be sure to read Safety Information before using
the machine.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pro 8300S and is the answer not in the manual?

Questions and answers

Related Manuals for Ricoh Pro 8300S

Summary of Contents for Ricoh Pro 8300S

  • Page 1 Operating Instructions Adjustment Item Menu Guide: TCRU/ORU For safe and correct use, be sure to read Safety Information before using the machine.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Introduction................................. 7 How to Read This Manual..........................8 Symbols................................8 Disclaimer................................8 Notes................................8 Manuals for This Machine..........................9 Paper Feed Direction of Printed Copies (Side 1/Side 2)................10 1. Adjustment Settings for Operators Accessing Adjustment Settings for Operators....................13 Layout of Adjustment Settings for Operators....................14 Features of the Displayed Items and Setting Operations................15 Notes on How Adjustment Settings Are Applied to Printed Copies.............18...
  • Page 4 0213 [Continuous Slip Sheet Feed Mode]....................35 [Main Unit: Paper Feed/ Output]........................36 0301 [Double Feed Detection]........................36 0302 [When Double Feed is Detected]....................36 0304 [Skew Detection]..........................37 0305 [Skew Detection Level]........................38 0306 [Wide LCT: Fan Level]........................39 0307 [Wide LCT: Fan Timer]........................40 0308 [Pickup Assist Setting]........................
  • Page 5 0601 [Staple Position for Booklet]......................53 0602 [Folding Position for Booklet]......................54 0603 [Staple Position: Across Feed 1]...................... 56 0604 [Staple Position: Across Feed 2]...................... 57 0605 [Staple Position: With Feed]......................58 0606 [Punch Position: Across Feed]......................59 0607 [Punch Position: With Feed]......................59 0608 [Paper Alignment for Booklet: Across Feed]...................60 0609 [Set Number of Folds for Booklet]....................61 0610 [Feed Amount of Folding Roller for Booklet]..................
  • Page 6 0634 [Maximum No. Stacked Sheets in Output Tray]................78 0635 [Max. No. Stacked Sheets in Output Tray: Stapled Signature]............78 0636 [Maximum No. Stacked Sheets in Output Tray: Envelope]............78 0637 [Staple Tray: Rib Installed Mode to Strengthen Paper]..............79 0638 [Accuracy Priority for Stapling]......................79 0639 [Accuracy Priority for Booklet]......................79 0640 [Convert Number of Sheets for Booklet]..................80 [Finishing: Finisher 2]............................81...
  • Page 7 0817 [Gate Fold Position 3]........................105 0818 [Folding Unit Tray Full Detection]....................106 0819 [Number of Sheets Folded after Full Detection]................106 [Finishing: Perfect Binder]..........................108 0901 [Perf Bind Cvr Sht Posit: With Feed]....................108 0902 [Perf Bind Cvr Sht Posit: Across Feed]...................108 0903 [Perfect Binding Finishing Angle]....................109 0904 [Applying Binding Glue]........................109 [Finishing: Stacker]............................111...
  • Page 8 1204 [Paper Transfer Output Correction: Paper Edge]................ 127 1205 [Avoid Paper Transfer Shock Jitter: Feed Interval]............... 128 1206 [Fusing Temperature]........................128 1207 [Fusing Pressure Temperature].......................130 1208 [Fusing Pressure Roller On Before Fusing]..................130 1209 [Fusing Cleaning]........................... 131 1210 [Erase Margin]..........................131 1211 [Fusing Nip Width].........................132 [Machine: Paper Feed/ Output]........................

  • Page 9: Introduction

    Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.

  • Page 10: How To Read This Manual

    How to Read This Manual Symbols This manual uses the following symbols: Indicates points to pay attention to when using the machine, and explanations of likely causes of paper misfeeds, damage to originals, or loss of data. Be sure to read these explanations. Indicates supplementary explanations of the machine’s functions, and instructions on resolving user errors.

  • Page 11: Manuals For This Machine

    Manuals for This Machine The following manuals are for skilled operators only. Adjustment Item Menu Guide This manual explains the items in [Adjustment Settings for Operators] and the advanced settings for custom paper adjustment in "Advanced Settings". Replacement Guide This manual explains how to replace the machine's components. Troubleshooting This manual explains how to troubleshoot problems related to image quality, paper delivery, and other aspects of machine operation.

  • Page 12: Paper Feed Direction Of Printed Copies (Side 1/Side 2)

    Paper Feed Direction of Printed Copies (Side 1/Side 2) Depending on the setting, printed copies are fed as follows: Side 1 is the surface of the paper printed during one-sided printing, or the surface of the first print during duplex printing. Side 2 is the surface of the paper printed on the back side of Side 1 during duplex printing.
  • Page 13 Single-sided printing: Printed side face up DFP408 A. Side 1 B. Paper feed direction of Side 1 Duplex printing: Printed side face up DFP409 A. Side 1 B. Paper feed direction of Side 1 C. Side 2 D. Paper feed direction of Side 2...

  • Page 15: Adjustment Settings For Operators

    1. Adjustment Settings for Operators Accessing Adjustment Settings for Operators Press "Login/Logout" ( ) on the top right of the screen. The name that appears lower the "Login/Logout" icon ( ) depends on the type of administrator logging in. Enter your login user name and password, and then press [Login]. If you are logging on as the administrator for the first time, enter "admin"...

  • Page 16: Layout Of Adjustment Settings For Operators

    1. Adjustment Settings for Operators Layout of Adjustment Settings for Operators This section explains how to use Adjustment Settings for Operators. ECH001 1. [ ] Press this key to collapse the hierarchical display of the adjustment items and display the group names of those items.

  • Page 17: Features Of The Displayed Items And Setting Operations

    Features of the Displayed Items and Setting Operations Features of the Displayed Items and Setting Operations The following operations are available for each adjustment item: • Value setting • Item setting • Executing • Display only Value setting Press [+] or [-] to increase or decrease the value respectively, or use the numeric keypad to enter the value.
  • Page 18 1. Adjustment Settings for Operators • [×]: Press to delete the entered value character by character. • [Clear]: Clear the entered value. • [+/-]: Change the sign of the entered value from + (positive) to - (negative) and vice versa. •...
  • Page 19 Features of the Displayed Items and Setting Operations Display only You can check the setting of the selected item.

  • Page 20: Notes On How Adjustment Settings Are Applied To Printed Copies

    1. Adjustment Settings for Operators Notes on How Adjustment Settings Are Applied to Printed Copies The adjustment settings are applied to printed copies according to the settings specified for each paper tray, paper size, and paper weight. Depending on the adjustment setting, the same settings specified under different categories may be applied to printed copies concurrently.
  • Page 21 Notes on How Adjustment Settings Are Applied to Printed Copies Settings for each paper size These adjustment settings can be specified for each paper size. The settings are applied only to printed copies of each paper size. • For information about the paper tray, paper thickness, and tray paper size settings that can be specified for a particular function, see the manual for the relevant function.
  • Page 22 1. Adjustment Settings for Operators...

  • Page 23: Details Of Menu Items In Adjustment Settings For Operators

    2. Details of Menu Items in Adjustment Settings for Operators [Main Unit: Image Position] 0101 [Image Position: With Feed] Adjust the image position printed on the paper by adjusting the start timing of the registration. You cannot individually adjust the image position on sides 1 and 2. Side 1 Paper feed direction Default...
  • Page 24 2. Details of Menu Items in Adjustment Settings for Operators Side 2 Paper feed direction Default Left Right (Trailing edge) (Leading edge) Bottom CEZ013 Press [ ] to shift the image to the left (trailing edge). Press [ ] to shift the image to the right (leading edge). Default Max.

  • Page 25: 0102 [Image Position: Across Feed]

    [Main Unit: Image Position] Leading-edge margin Trailing-edge margin Paper feed direction CEZ586 • This setting is not effective for paper fed from paper trays with custom paper presets. For such paper, the value specified in [With Feed] in [Image Position: Side 1] / [Image Position: Side 2] in 1101 [Image Position] in "Advanced Settings"...
  • Page 26 2. Details of Menu Items in Adjustment Settings for Operators Side 2 Paper feed direction Left Right Default (Trailing edge) (Leading edge) Bottom CEZ014 Press [ ] to shift the image to the top. Press [ ] to shift the image to the bottom. Default Max.

  • Page 27: 0103 [Registration Gate: Paper Buckle Amount]

    [Main Unit: Image Position] • This setting is not effective for paper fed from paper trays with custom paper presets. For such paper, the value specified in [Across Feed] in [Image Position: Side 1] / [Image Position: Side 2] in 1101 [Image Position] in "Advanced Settings"...

  • Page 28: 0105 [Deactivate Image Position Adjustment Across Feed]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Item Step Unit Value Value Value [Paper Weight 5] [Paper Weight 6] [Paper Weight 7] [Paper Weight 8] 0105 [Deactivate Image Position Adjustment Across Feed] Set whether to adjust registration with across feed direction. Printing will stop when the vertical position has deviated exceeding the adjustable range (3 mm/ 0.1inch).

  • Page 29: 0106 [Select Test Pattern For Image Position Adjustment]

    [Main Unit: Image Position] • This setting is not effective for paper fed from paper trays with custom paper presets. For such paper, the value specified in [Deactivate Image Position Adjustment Across Feed] in 1101 [Image Position] in "Advanced Settings" takes precedence. 0106 [Select Test Pattern for Image Position Adjustment] This function is available for Pro 8300SO, Pro 8310S and Pro 8320S.

  • Page 30: 0108 [Adf Double Feed Detection]

    2. Details of Menu Items in Adjustment Settings for Operators [Img Pos:With Feed:Side2] Adjust the position of the image on side 2 parallel to the paper feed direction. Press [ ] to shift the image to the right (leading edge) or [ ] to shift it to the left (trailing edge). [Img Magn: With Feed] Adjust the horizontal image scaling on sides 1 and 2.
  • Page 31 [Main Unit: Image Position] Setting Items Values Default Value [Setting] [Off] [Off] [On (Default)]...

  • Page 32: [Main Unit: Image Quality]

    2. Details of Menu Items in Adjustment Settings for Operators [Main Unit: Image Quality] 0201 [Erase Margin: With Feed] Adjust erase margin of paper edge with feed. By increasing the mask width, you can increase the paper margin at the leading edge, or trailing edge of the paper.

  • Page 33: 0202 [Adjust Image Density]

    [Main Unit: Image Quality] 0202 [Adjust Image Density] Execute image density control manually. The machine adjusts the image density. This operation takes about 30 seconds during which a message appears on the control panel. Do not pull out the drawer while the message is being displayed. If the density does not change after applying this function several times, contact your sales or service representative.

  • Page 34: 0205 [Line Width]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [Setting] None • Increasing the toner adhesion might reduce fusibility, causing toner splatter or distorted text and thin lines. 0205 [Line Width] Adjust the line width of printing.

  • Page 35: 0207 [Fusing Temperature On Standby]

    [Main Unit: Image Quality] 0207 [Fusing Temperature on Standby] Adjust the fusing conditions in the standby status. To achieve proper fusing when printing, the machine adjusts the temperature of the heating roller according to the paper type or thickness. You can reduce the wait time during which the machine makes this adjustment by changing the temperature in effect during standby.

  • Page 36: 0208 [Avoid Paper Transfer Shock Jitter: Feed Interval]

    2. Details of Menu Items in Adjustment Settings for Operators 0208 [Avoid Paper Transfer Shock Jitter: Feed Interval] Select whether to avoid paper transfer shock jitter with feed interval. If "1" is selected, the machine adjusts the interval between sheets to reduce jitter .

  • Page 37: 0212 [Productivity Priority Mode]

    [Main Unit: Image Quality] 0212 [Productivity Priority Mode] Set the image area ratio threshold of toner refreshing mode. After printing on the thick paper, the machine usually stops so that the fusing temperature decreases before printing on the thin paper. If you specify [Productivity Priority] for this setting, the machine will print non-stop so that the fusing temperature does not decrease.

  • Page 38: [Main Unit: Paper Feed/ Output]

    2. Details of Menu Items in Adjustment Settings for Operators [Main Unit: Paper Feed/ Output] 0301 [Double Feed Detection] Set whether to detect double feed. If [On] is selected, the machine stops when it detects paper double feeding, so as to prevent mixing of unprinted paper.

  • Page 39: 0304 [Skew Detection]

    [Main Unit: Paper Feed/ Output] If [Suspended] is selected, the machine, on detecting a double feed, stops printing and displays a paper misfeed message. If [Suspended After Paper Diversion] is selected, the machine stops printing if a double feed is detected, then delivers the sheets to the paper trap inside the machine at the bottom left, and displays a paper misfeed message.

  • Page 40: 0305 [Skew Detection Level]

    2. Details of Menu Items in Adjustment Settings for Operators Setting Items Values Default Value [Tray 1] [Off] [On] [On] [Tray 2] [Tray 3] [Tray 4] [Tray 5] [Tray 6] [Tray A] [2 Sided] [Tray T1] [Tray T2] [Tray T3] [Tray T4] •...

  • Page 41: 0306 [Wide Lct: Fan Level]

    [Main Unit: Paper Feed/ Output] Default Max. Min. Setting Items Step Unit Value Value Value [Tray 1] [Tray 2] [Tray 3] [Tray 4] [Tray 5] [Tray 6] [Tray A] [2 Sided] [Tray T1] [Tray T2] [Tray T3] [Tray T4] 0306 [Wide LCT: Fan Level] Adjust air-assist fan level.

  • Page 42: 0307 [Wide Lct: Fan Timer]

    2. Details of Menu Items in Adjustment Settings for Operators • This setting is not effective for paper fed from paper trays with custom paper presets. For such paper, the value specified in [Fan Level] 1301 [3-Tray LCIT] in "Advanced Settings" takes precedence.

  • Page 43: 0309 [Paper Separation Time]

    [Main Unit: Paper Feed/ Output] Setting Items Values Default Value [Tray 4: Wide LCIT] [Auto] [Auto] [On] [Tray 5: Wide LCIT] [Off] [Tray 6: Wide LCIT] [Tray 4: LCIT] [Tray 5: LCIT] [Tray 6: LCIT] [Tray A] • This setting is not effective for paper fed from paper trays with custom paper presets. For such paper, the value specified in [Pickup Assist] in 1321 [Main/3-Tray LCIT/Bypass] on "Advanced Settings"...

  • Page 44: 0310 [Correct Output Paper Curl]

    2. Details of Menu Items in Adjustment Settings for Operators • Be aware, however, that increasing the paper separation time increases the reverse roller-paper contact time, leading to a higher risk of paper scratching. • Also, note that optimum printing speed might not be possible if the paper separation time is increased.

  • Page 45: 0312 [Lower Jam Detection Strictness]

    [Main Unit: Paper Feed/ Output] If [Off] is selected, the machine continues printing while the maximum correction of 3 mm (0.1 inch) is applied even though the paper misalignment exceeds the adjustable range. Setting Items Values Default Value [Tray 1] [Off] [Off] [On]...

  • Page 46: 0313 [Behavior After Paper Diversion]

    2. Details of Menu Items in Adjustment Settings for Operators 0313 [Behavior After Paper Diversion] Select the machine behavior when printing stops due to double-feeds or over-skews. Setting Items Values Default Value [Setting] [Suspend] [Suspend] [Continue Unless Paper Diversion Box Full] [Continue Until All Jobs In Queue Complete]...

  • Page 47: [Main Unit: Maintenance]

    [Main Unit: Maintenance] [Main Unit: Maintenance] 0502 [Execute Photoconductor Refreshing] Remove the dirt on the Drum surface. It takes about 4 minutes. Do not open the Front Cover during the operation. Setting Item Remarks [Photoconductor Refreshing] Press [Execute]. 0503 [Screw-on Cap to Replace] Press [Execute] to close the Toner Bottle Cap.

  • Page 48: 0506 [Execute Developer Exhaust]

    2. Details of Menu Items in Adjustment Settings for Operators For details about filling/discharging developer, see the Replacement Guide. Code Status Causes Solutions Succeeded (developer replenished) Developer not discharged Developer in the developer A new developer bottle is unit has not been required.

  • Page 49: 0509 [Developer Setup: Result]

    [Main Unit: Maintenance] For details about filling/discharging developer, see the Replacement Guide. Code Status Causes Solutions Succeeded (developer discharged) Developer not discharged • The developer bottle is Detach the developer bottle, not attached to the attach it to the outlet, and outlet.

  • Page 50: 0512 [Execute Itb Manual Lubrication]

    2. Details of Menu Items in Adjustment Settings for Operators Code Status Causes Solutions Replenishment quit forcefully • The front covers have Open the front covers, turn been closed. on the main power, and then try the operation again. • The power was turned off during the operation.

  • Page 51: 0516 [Display Parts Life Counter]

    [Main Unit: Maintenance] Setting Items Values [Developer] Press [Execute]. [Photoconductor Unit] [Charger Unit] [PCU Cleaning Unit] [ITB Cleaning Unit] [Paper Transfer Unit] [Fuser Unit] [Fuser Cleaning Unit] [Tray 1] [Tray 2] [Tray 3] [Wide LCIT: Tray 4] [Wide LCIT: Tray 5] [Wide LCIT: Tray 6] [LCIT: Tray 4] [LCIT: Tray 5]...

  • Page 52: 0517 [Temperature / Humidity Inside]

    2. Details of Menu Items in Adjustment Settings for Operators Setting Items Values [Developer] Value display only. [Photoconductor Unit] [Charger Unit] [PCU Cleaning Unit] [ITB Cleaning Unit] [Paper Transfer Unit] [Fuser Unit] [Fuser Cleaning Unit] [Tray 1] [Tray 2] [Tray 3] [Wide LCIT: Tray 4] [Wide LCIT: Tray 5] [Wide LCIT: Tray 6]...

  • Page 53: 0518 [Temperature / Humidity Outside]

    [Main Unit: Maintenance] Setting Items Values [Temperature] Value display only. [Humidity] 0518 [Temperature / Humidity Outside] Display temperature and humidity around the machine. If your service representative requests it, report this information. Setting Items Values [Temperature] Value display only. [Humidity] 0519 [Display System Message for When Outside Optimal Range] Specify whether or not to display the banner to indicate conditions outside the recommended operating environment.

  • Page 54: 0522 [Execute Charger Cleaning]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [Fuser Unit No.] Setting Items Setting Items Unit [Curt:Dist:Fuser Unit] Value display only. [Curt:Dist:Fuser Cleaning Unit] [Curt:Page:Fuser Unit] sheet(s) [Curt:Page:Fuser Cleaning Unit] 0522 [Execute Charger Cleaning] Execute charger cleaning.

  • Page 55: [Finishing: Finisher 1]

    [Finishing: Finisher 1] [Finishing: Finisher 1] 0601 [Staple Position for Booklet] Adjust the horizontal position of the booklet staples when using Booklet Finisher SR5120. Press [ ] to move the position left, or press [ ] to move it right on the open booklet.

  • Page 56: 0602 [Folding Position For Booklet]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -1.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [SRA3 SEF] [SRA4 SEF] [310 432 mm SEF] [226 310 mm SEF] [13 19 SEF] [13 19 SEF]...
  • Page 57 [Finishing: Finisher 1] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -1.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [SRA3 SEF] [SRA4 SEF] [310 432 mm SEF] [226 310 mm SEF] [13 19 SEF] [13 19 SEF] [13 18 SEF] SEF] SEF]...

  • Page 58: 0603 [Staple Position: Across Feed 1]

    2. Details of Menu Items in Adjustment Settings for Operators 0603 [Staple Position: Across Feed 1] Adjust the vertical position of the staple (applied at an edge) when using Finisher SR5110 or Booklet Finisher SR5120. Press [ ] to move the stapling position away from the side edge of the sheet or [ ] to move it toward the edge.

  • Page 59: 0604 [Staple Position: Across Feed 2]

    [Finishing: Finisher 1] 0604 [Staple Position: Across Feed 2] Adjust the vertical distance (up and down) between the staples (dual) when using Finisher SR5110 or Booklet Finisher SR5120. Press [ ] to move the two stapling positions away from the center and each other or [ ] to move them toward each other.

  • Page 60: 0605 [Staple Position: With Feed]

    2. Details of Menu Items in Adjustment Settings for Operators 0605 [Staple Position: With Feed] Adjust the horizontal position of the staples when using Finisher SR5110 or Booklet Finisher SR5120. Press [ ] to move the stapling position away from the trailing edge of the sheet or [ ] to move it toward the edge.

  • Page 61: 0606 [Punch Position: Across Feed]

    [Finishing: Finisher 1] 0606 [Punch Position: Across Feed] Adjust the vertical position of the punch holes when using Finisher SR5110 or Booklet Finisher SR5120. Press [ ] to move the position forward (up), or [ ] to move it backward (down). Default Max.

  • Page 62: 0608 [Paper Alignment For Booklet: Across Feed]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [2 Holes JP/ EU] -4.0 [3 Holes US] [4 Holes EU] [4 Holes NE] [2 Holes US] 0608 [Paper Alignment for Booklet: Across Feed] Adjust the width of the staple jogger to reduce dispersion of paper in vertical orientation for each paper size when using Booklet Finisher SR5120.

  • Page 63: 0609 [Set Number Of Folds For Booklet]

    [Finishing: Finisher 1] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -0.5 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [SRA3 SEF] [SRA4 SEF] [310 432 mm SEF] [226 310 mm SEF] [13 19 SEF] [13 19 SEF] [13 18 SEF] SEF] SEF]...

  • Page 64: 0610 [Feed Amount Of Folding Roller For Booklet]

    2. Details of Menu Items in Adjustment Settings for Operators When you select "0", the default value, the finisher folds the booklet according to the number of sheets in the booklet, as shown below. • 1–6 sheets: 1 time • 7–10 sheets: 2 times •...
  • Page 65 [Finishing: Finisher 1] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -2.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [SRA3 SEF] [SRA4 SEF] [310 432 mm SEF] [226 310 mm SEF] [13 19 SEF] [13 19 SEF] [13 18 SEF] SEF] SEF]...

  • Page 66: 0612 [Paper Alignment For Stapling: Across Feed: 1St Time]

    2. Details of Menu Items in Adjustment Settings for Operators 0612 [Paper Alignment for Stapling: Across Feed: 1st Time] Adjust the width of the staple jogger to reduce the dispersion of paper orientation in right angle for each paper size when using Finisher SR5110 or Booklet Finisher SR5120. Use [ ] or [ ] to expand or reduce the width.

  • Page 67: 0613 [Paper Alignment For Stapling: Across Feed: 2Nd Time]

    [Finishing: Finisher 1] 0613 [Paper Alignment for Stapling: Across Feed: 2nd Time] Adjust the width of the staple jogger to reduce the dispersion of paper orientation in right angle for each paper size when using Finisher SR5110 or Booklet Finisher SR5120. Use [ ] or [ ] to expand or reduce the width.

  • Page 68: 0614 [Paper Alignment For Stapling:paper Weight:across Feed:1St]

    2. Details of Menu Items in Adjustment Settings for Operators 0614 [Paper Alignment for Stapling:Paper Weight:Across Feed:1st] Adjust the width of the staple jogger to reduce the dispersion of paper orientation in right angle for each paper weight when using Finisher SR5110 or Booklet Finisher SR5120. Use [ ] or [ ] to expand or reduce the width.

  • Page 69: 0616 [Paper Alignment In Shift Tray: Across Feed]

    [Finishing: Finisher 1] Default Max. Min. Setting Items Step Unit Value Value Value [Paper Weight 1] -1.0 [Paper Weight 2] [Paper Weight 3] [Paper Weight 4] [Paper Weight 5] [Paper Weight 6] [Paper Weight 7] [Paper Weight 8] 0616 [Paper Alignment in Shift Tray: Across Feed] Adjust the width of paper alignment jogger on shift tray when using Finisher SR5110 or Booklet Finisher SR5120.

  • Page 70: 0617 [Paper Alignment For Stapling: With Feed: 1St Time]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -1.0 [B4 JIS SEF] [A4 LEF] [A4 SEF] [B5 JIS LEF] [B5 JIS SEF] [A5 LEF] [A5 LEF] [11 17 SEF] 14 SEF] SEF]...

  • Page 71: 0618 [Paper Alignment For Stapling: With Feed: 2Nd Time]

    [Finishing: Finisher 1] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -2.5 [B4 JIS SEF] [A4 LEF] [A4 SEF] [B5 JIS LEF] [B5 JIS SEF] [11 17 SEF] 14 SEF] SEF] [F4a SEF] 11 LEF] 11 SEF] [8K SEF] [16K LEF] [16K SEF]...

  • Page 72: 0619 [Paper Alignment For Stapling:paper Weight:with Feed:1St]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -2.5 [B4 JIS SEF] [A4 LEF] [A4 SEF] [B5 JIS LEF] [B5 JIS SEF] [11 17 SEF] 14 SEF] SEF] [F4a SEF] 11 LEF]...

  • Page 73: 0620 [Paper Alignment For Stapling:paper Weight:with Feed:2Nd]

    [Finishing: Finisher 1] Default Max. Min. Setting Items Step Unit Value Value Value [Paper Weight 1] -2.5 [Paper Weight 2] [Paper Weight 3] [Paper Weight 4] [Paper Weight 5] [Paper Weight 6] [Paper Weight 7] [Paper Weight 8] 0620 [Paper Alignment for Stapling:Paper Weight:With Feed:2nd] Adjust tip stopper movement when using edge stapling when using Finisher SR5110 or Booklet Finisher SR5120.

  • Page 74: 0621 [Punch Skew Correction]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [Paper Weight 1] -2.5 [Paper Weight 2] [Paper Weight 3] [Paper Weight 4] [Paper Weight 5] [Paper Weight 6] [Paper Weight 7] [Paper Weight 8] 0621 [Punch Skew Correction] Set the punch skew correction when using Finisher SR5110 or Booklet Finisher SR5120.

  • Page 75: 0623 [Amount Of Z-Fold Skew Correction]

    [Finishing: Finisher 1] Setting Item Values Default Value [Set] [Off] [On: Reverse] [On] [On: Reverse] 0623 [Amount of Z-fold Skew Correction] Adjust the striking amount of paper during Z-folding skew correction when using Booklet Finisher SR5120. Use this if the Z-fold skew correction causes problems. With the factory default setting of "0.0", the length of the sheets moved is set to 7 mm.

  • Page 76: 0625 [Amount Of Punch Skew Correction]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [Set] -3.0 0625 [Amount of Punch Skew Correction] Adjust the punch skew level when using Finisher SR5110 or Booklet Finisher SR5120. It reduces the punch skew due to paper size, thickness and curl.

  • Page 77: 0627 [Paper Alignment In Shift Tray Setting: Stapled Signature]

    [Finishing: Finisher 1] Setting Item Values Default Value [Set] [Speed Priority] [Speed Priority] [Accuracy Priority] 0627 [Paper Alignment in Shift Tray Setting: Stapled Signature] Set the alignment precision of output sheets during shift sorting when using Finisher SR5110 or Booklet Finisher SR5120.

  • Page 78: 0630 [Output Tray Descending Position]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] None [B4 JIS SEF] [A4 LEF] [A4 SEF] [B5 JIS LEF] [B5 JIS SEF] [11 17 SEF] 14 SEF] 11 LEF] 11 SEF] [8K SEF]...

  • Page 79: 0631 [Output Trail Edge Press Setting]

    [Finishing: Finisher 1] 0631 [Output Trail Edge Press Setting] Set whether or not to hold the trailing edge of sheets when ejected on the shift tray when using Finisher SR5110 or Booklet Finisher SR5120. Setting it [ON] reduces the diversion of sheets due to the paper type and paper condition. Setting Item Values Default Value...

  • Page 80: 0634 [Maximum No. Stacked Sheets In Output Tray]

    2. Details of Menu Items in Adjustment Settings for Operators 0634 [Maximum No. Stacked Sheets in Output Tray] Set the proper number of sheets for each paper size to stack on the shift tray at the time of shift sorting when using Finisher SR5110 or Booklet Finisher SR5120.

  • Page 81: 0637 [Staple Tray: Rib Installed Mode To Strengthen Paper]

    [Finishing: Finisher 1] Setting Item Values Default Value [Setting] [Default] [Default] [Increase by a Small Amount] [Increase by a Medium Amount] [Increase by a Large Amount] 0637 [Staple Tray: Rib Installed Mode to Strengthen Paper] Set the operation when the Paper Strengthening Rib is installed to staple tray. Setting Item Values Default Value...

  • Page 82: 0640 [Convert Number Of Sheets For Booklet]

    2. Details of Menu Items in Adjustment Settings for Operators 0640 [Convert Number of Sheets for Booklet] Set the convert number of sheets for a booklet when using Booklet Finisher SR5120. Default Max. Min. Setting Items Step Unit Value Value Value [Paper Weight 1] None...

  • Page 83: [Finishing: Finisher 2]

    [Finishing: Finisher 2] [Finishing: Finisher 2] 0701 [Paper Alignment for Stapling: Across Feed] Adjust the width of the staple jogger when using the staple function on Finisher SR5090 or Booklet Finisher SR5100. Use this to reduce the vertical variation in paper alignment due to differing size, thickness, or paper curl. Press [ ] to make the width of the staple jogger wider, or [ ] to make narrower.

  • Page 84: 0702 [Paper Alignment For Booklet: Across Feed]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -1.5 [B4 JIS SEF] [A4 SEF] [A4 LEF] [B5 JIS SEF] [B5 JIS LEF] [11 17 SEF] 14 SEF] SEF] 11 SEF] 11 LEF]...

  • Page 85: 0703 [Staple Position]

    [Finishing: Finisher 2] Vertical alignment Jogger width Horizontal alignment Paper feed direction CEZ018 Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -1.5 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [11 17 SEF] 14 SEF] SEF] 11 SEF] [12 18 SEF] [8K SEF]...

  • Page 86: 0704 [Staple Position For Booklet]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -3.5 [B4 JIS SEF] [A4 SEF] [A4 LEF] [B5 JIS SEF] [B5 JIS LEF] [11 17 SEF] 14 SEF] SEF] 11 SEF] 11 LEF]...

  • Page 87: 0705 [Folding Position For Booklet]

    [Finishing: Finisher 2] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -3.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [11 17 SEF] 14 SEF] SEF] 11 SEF] [12 18 SEF] [8K SEF] [Other Paper Sizes] 0705 [Folding Position for Booklet] Adjust the horizontal position of the folding when using Booklet Finisher SR5100.

  • Page 88: 0706 [Folding Position For Booklet: By Number Of Sheets]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -3.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [11 17 SEF] 14 SEF] SEF] 11 SEF] [12 18 SEF] [8K SEF] [Other Paper Sizes] 0706 [Folding Position for Booklet: By Number of Sheets]...
  • Page 89 [Finishing: Finisher 2] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF: 1-5 Sheets] -3.0 [A3 SEF: 6-10 Sheets] [A3 SEF: 11-15 Sheets] [A3 SEF: 16 Sheets or More] [B4 SEF: 1-5 Sheets] [B4 SEF: 6-10 Sheets] [B4 SEF: 11-15 Sheets] [B4 SEF: 16 Sheets or More] [A4 SEF: 1-5 Sheets]...
  • Page 90 2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value 14 SEF: 16 Sheets or -3.0 More] SEF: 1-5 Sheets] SEF: 6-10 Sheets] SEF: 11-15 Sheets] SEF: 16 Sheets or More] 11 SEF: 1-5 Sheets] 11 SEF: 6-10 Sheets]...

  • Page 91: 0707 [Number Of Sheets Align For Stapling]

    [Finishing: Finisher 2] 0707 [Number of Sheets Align for Stapling] Specify the number of sheets to align for stapling at one time. If too many sheets are delivered to the shift unit, the stacked sheets may not be correctly aligned due to the paper type and paper condition.
  • Page 92 2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] sheet(s) [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [11 17 SEF] 14 SEF] SEF] 11 SEF] [12 18 SEF] [8K SEF] [Other Paper Sizes]...

  • Page 93: [Finishing: Fold]

    [Finishing: Fold] [Finishing: Fold] 0801 [Z-fold Position 1] Adjust the folding position on the front end side when Z-folding is done by the Paper Folding Unit. Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [12 18 SEF] [11 17 SEF]...

  • Page 94: 0803 [Half Fold Position: 1 Sheet Fold]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [12 18 SEF] [11 17 SEF] 14 SEF] 11 SEF] [8K SEF] [Other Paper Sizes] 0803 [Half Fold Position: 1 sheet Fold] Adjust the folding position when Folding in Two is done by the Paper Folding Unit.

  • Page 95: 0804 [Half Fold Position: Multi-Sheet Fold]

    [Finishing: Fold] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [SRA3 SEF] [SRA4 SEF] [310 432 mm SEF] [226 310 mm SEF] [13 19 SEF] [13 19 SEF] [13 18 SEF] SEF] SEF]...
  • Page 96 2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [SRA3 SEF] [SRA4 SEF] [310 432mm SEF] [226 310mm SEF] [13 19 SEF] [13 19 SEF]...

  • Page 97: 0805 [Letter Fold-Out Position 1: 1 Sheet Fold]

    [Finishing: Fold] 0805 [Letter Fold-out Position 1: 1 sheet Fold] Adjust the folding position on the front end side when Outside 3 Folding is done by the Paper Folding Unit. It is applied when Single Folding is selected. Default Max. Min.

  • Page 98: 0807 [Letter Fold-Out Position 2: 1 Sheet Fold]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [B4 JIS SEF] -4.0 [A4 SEF] [B5 JIS SEF] -3.0 14 SEF] -4.0 11 SEF] [Other Paper Sizes] 0807 [Letter Fold-out Position 2: 1 sheet Fold] Adjust the folding position on the rear end side when Outside 3 Folding is done by the Paper Folding Unit.

  • Page 99: 0808 [Letter Fold-Out Position 2: Multi-Sheet Fold]

    [Finishing: Fold] 0808 [Letter Fold-out Position 2: Multi-sheet Fold] Adjust the folding position on the rear end side when Outside 3 Folding is done by the Paper Folding Unit. It is applied when Overlap Folding is selected. Default Max. Min. Setting Items Step Unit...

  • Page 100: 0810 [Letter Fold-In Position 1: Multi-Sheet Fold]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [12 18 SEF] [11 17 SEF] 14 SEF] 11 SEF] [8K SEF] [Other Paper Sizes] 0810 [Letter Fold-in Position 1: Multi-sheet Fold]...

  • Page 101: 0811 [Letter Fold-In Position 2: 1 Sheet Fold]

    [Finishing: Fold] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [12 18 SEF] [11 17 SEF] 14 SEF] 11 SEF] [8K SEF] [Other Paper Sizes] 0811 [Letter Fold-in Position 2: 1 sheet Fold] Adjust the folding position on the rear end side when Inside 3 Folding is done by the Paper Folding Unit.

  • Page 102: 0812 [Letter Fold-In Position 2: Multi-Sheet Fold]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [12 18 SEF] [11 17 SEF] 14 SEF] 11 SEF] [8K SEF] [Other Paper Sizes] 0812 [Letter Fold-in Position 2: Multi-sheet Fold]...

  • Page 103: 0813 [Double Parallel Fold Position 1]

    [Finishing: Fold] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [12 18 SEF] [11 17 SEF] 14 SEF] 11 SEF] [8K SEF] -4.0 [Other Paper Sizes] *1 If the machine in use allows -0.1 mm or less to be selected, this will be interpreted as 0.0 mm. 0813 [Double Parallel Fold Position 1] Adjust the first folding position when Parallel Folding is done by the Paper Folding Unit.

  • Page 104: 0814 [Double Parallel Fold Position 2]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [12 18 SEF] [11 17 SEF] 14 SEF] 11 SEF] [8K SEF] [Other Paper Sizes] 0814 [Double Parallel Fold Position 2]...

  • Page 105: 0815 [Gate Fold Position 1]

    [Finishing: Fold] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [12 18 SEF] [11 17 SEF] 14 SEF] 11 SEF] [8K SEF] [Other Paper Sizes] 0815 [Gate Fold Position 1] Adjust the folding position on the front end side when Gate Folding is done by the Paper Folding Unit.

  • Page 106: 0816 [Gate Fold Position 2]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [11 17 SEF] 14 SEF] 11 SEF] [8K SEF] [Other Paper Sizes] 0816 [Gate Fold Position 2] Adjust the folding position on the rear end side when Gate Folding is done by the Paper Folding Unit.

  • Page 107: 0817 [Gate Fold Position 3]

    [Finishing: Fold] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [11 17 SEF] 14 SEF] 11 SEF] [8K SEF] [Other Paper Sizes] 0817 [Gate Fold Position 3] Adjust the center folding position when Gate Folding is done by the Paper Folding Unit.

  • Page 108: 0818 [Folding Unit Tray Full Detection]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [12 18 SEF] [11 17 SEF] 14 SEF] 11 SEF] [8K SEF] [Other Paper Sizes] 0818 [Folding Unit Tray Full Detection]...
  • Page 109 [Finishing: Fold] • If the display of the warning message is delayed, the paper delivered to the folding unit tray may not be stacked properly or the delivered paper may block the paper exit and cause subsequent paper to be misfed. Default Max.

  • Page 110: [Finishing: Perfect Binder]

    2. Details of Menu Items in Adjustment Settings for Operators [Finishing: Perfect Binder] 0901 [Perf Bind Cvr Sht Posit: With Feed] For Perfect Binding, correct the positional deviation in the feeding direction of the front cover and middle paper bundle. When you bind the copies with the perfect binder, make this adjustment if the center of the book block's spine and the center of the cover sheet are misaligned vertically.

  • Page 111: 0903 [Perfect Binding Finishing Angle]

    [Finishing: Perfect Binder] 0903 [Perfect Binding Finishing Angle] Adjust the right angle of the three sides when cutting a bundle of paper. Make this adjustment if the three edges of the deck of paper cut by the perfect binder are not square. Enter the distance from the square part at each edge.
  • Page 112 2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Item Step Unit Value Value Value [Setting] 0.00 0.30 -0.30 0.05...

  • Page 113: [Finishing: Stacker]

    [Finishing: Stacker] [Finishing: Stacker] 1001 [Ppr Align in Stack Tray: Acr Feed 1] Adjust the alignment width in the rear end jogger at the Stacker to reduce dispersion of sheets in the vertical direction for each paper size. Press [ ] to make the width of the jogger wider, or [ ] to make narrower. Default Max.

  • Page 114: 1002 [Ppr Align In Stack Tray: Acr Feed 2]

    2. Details of Menu Items in Adjustment Settings for Operators 1002 [Ppr Align in Stack Tray: Acr Feed 2] Adjust the alignment width in the front end jogger at the Stacker to reduce dispersion of sheets in the vertical direction for each paper size. Press [ ] to make the width of the jogger wider, or [ ] to make narrower.

  • Page 115: 1004 [Ppr Align In 2Nd Stack Tray: Acr Feed 1]

    [Finishing: Stacker] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -1.0 [B4 JIS SEF] [A4 LEF] [A4 SEF] [B5 JIS LEF] [B5 JIS SEF] [A5 LEF] [A5 SEF] [11 17 SEF] 14 SEF] 11 LEF] 11 SEF] LEF] SEF] [Other Paper Sizes]...

  • Page 116: 1005 [Ppr Align In 2Nd Stack Tray: Acr Feed 2]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -1.0 [B4 JIS SEF] [A4 LEF] [A4 SEF] [B5 JIS LEF] [B5 JIS SEF] [A5 LEF] [A5 SEF] [11 17 SEF] 14 SEF] 11 LEF]...

  • Page 117: 1006 [Ppr Align In 2Nd Stack Tray: With Feed]

    [Finishing: Stacker] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -1.0 [B4 JIS SEF] [11 17 SEF] 14 SEF] [Other Paper Sizes] 1006 [Ppr Align in 2nd Stack Tray: With Feed] Adjust the alignment position of the Tip Stopper of the Second Stacker when connected. It reduces dispersion of sheets in the feeding direction for each paper size.

  • Page 118: 1007 [Maximum Stack Quantity In Stacker Tray]

    2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -1.0 [B4 JIS SEF] [A4 LEF] [A4 SEF] [B5 JIS LEF] [B5 JIS SEF] [A5 LEF] [A5 SEF] [11 17 SEF] 14 SEF] 11 LEF]...
  • Page 119 [Finishing: Stacker] If the unit detects that the number of sheets reaches the set upper limit, a warning message will appear. Setting Items Selections Default Value [Large Size] [100%] [100%] [75%] [50%] [25%] [Small Size] [100%] [50%] [75%] [50%] [25%]...

  • Page 120: [Finishing: Interposer]

    2. Details of Menu Items in Adjustment Settings for Operators [Finishing: Interposer] 1101 [Interposer Double Feed Detection] Set whether to detect double feed. If this is set to "On", the machine detects double feeding and so keeps unintended blank sheets out of the delivered paper.

  • Page 121: Custom Paper Settings For Administrators

    3. Custom Paper Settings for Administrators Accessing Advanced Settings Press "Login/Logout" ( ) on the top right of the screen. The name that appears lower the "Login/Logout" icon depends on the type of administrator logging in. Enter your login user name and password, and then press [Login]. If you are logging on as the administrator for the first time, enter "admin".

  • Page 122: Description Of Paper Icons

    3. Custom Paper Settings for Administrators Description of Paper Icons You can check the custom paper status by checking the paper icon in the [Custom Paper Management] screen. If you change the custom paper profile in the advanced settings, the paper icon changes as follows: ECH002 1.

  • Page 123: Deleting Saved Custom Paper Profiles

    Deleting Saved Custom Paper Profiles Deleting Saved Custom Paper Profiles Only the machine administrator can delete the custom paper profile saved in the paper library. Press "Login/Logout" ( ) on the top right of the screen. The name that appears lower the "Login/Logout" icon depends on the type of administrator logging in.

  • Page 124: Backing Up And Restoring Custom Paper Profiles

    3. Custom Paper Settings for Administrators Backing up and Restoring Custom Paper Profiles Backing up Custom Paper Profiles Registered Under the [Custom Paper Management] Setting The machine administrator can save all types of registered custom paper to the paper library in an SD card at one time.
  • Page 125 Backing up and Restoring Custom Paper Profiles Press [ Press the [Home] ( ) icon at the center bottom of the screen. • Up to 1,000 custom papers can be saved in the library. • Each saved custom paper is assigned a sequential number from 0001. New data overwrites existing data if both the paper names and paper size settings are the same.

  • Page 126: Paper Presets In "Advanced Settings

    3. Custom Paper Settings for Administrators Paper Presets in "Advanced Settings" In "Advanced Settings", there are paper presets for various types of commercially-available paper. Even if you select a paper preset corresponding to a commercially-available paper from the Paper Library and register it in the [Custom Paper Management] screen, the preset, depending on the custom paper profile version, may not be an exact match for the actual paper.

  • Page 127: Details Of Menu Items In Advanced Settings

    4. Details of Menu Items in Advanced Settings [Machine: Image Position] 1101 [Image Position] [Image Position: Side 1]/[Image Position: Side 2] Adjust the vertical/horizontal position of the image to be printed on side 1/2 of the paper. Setting Item Max. Value Min.
  • Page 128 4. Details of Menu Items in Advanced Settings Setting Item Values 05: Setting [Do not Deactivate] [Deactivate] [Deactivate Only Jam Detection] [Image Magnification: Side 1]/[Image Magnification: Side 2] Adjust the vertical/horizontal image scaling on the side 1/2 of the paper according to the paper expansion or shrinkage.

  • Page 129: [Machine: Image Quality]

    [Machine: Image Quality] [Machine: Image Quality] 1201 [Max Image Density] Adjust the maximum image density. Use this to adjust the density of the printed image. Depending on the paper being used, it may be necessary to make this adjustment to achieve optimal toner adhesion. Setting Item Max.

  • Page 130: 1205 [Avoid Paper Transfer Shock Jitter: Feed Interval]

    4. Details of Menu Items in Advanced Settings Setting Item Max. Value Min. Value Step Unit 01: Leading Edge/02: Trailing Edge 03: Leading Edge Length 04: Trailing Edge Length 1205 [Avoid Paper Transfer Shock Jitter: Feed Interval] Set whether to extend the paper feed interval. If [On] is selected, the machine adjusts the interval between sheets to reduce jitter.
  • Page 131 [Machine: Image Quality] Corct Temp: Initial Feed / Corct Temp: Pre-Feed Adjust the temperature to be added at the beginning of the paper feed. Press [ ] to increase the temperature and [ ] to reduce it. Setting Item Max. Value Min.

  • Page 132: 1207 [Fusing Pressure Temperature]

    4. Details of Menu Items in Advanced Settings Setting Item Values 04: Low Temperature/05: Normal/High [Do not Reduce] (Full speed) Temperature [Level 1] (80% of full speed) [Level 2] (65% of full speed) [Level 3] (50% of full speed) 1207 [Fusing Pressure Temperature] Adjust the pressure roller temperature.

  • Page 133: 1209 [Fusing Cleaning]

    [Machine: Image Quality] Start Time of Pressure Before Feed Adjust the timing for the fusing pressure roller to come into contact with the fusing belt before the printing operation (paper feeding) starts. Once a job starts, the fusing pressure roller comes into contact with the fusing belt after the time specified in this setting has elapsed.

  • Page 134: 1211 [Fusing Nip Width]

    4. Details of Menu Items in Advanced Settings Paper feed direction Leading edge Trailing edge Bottom CEZ020 Trailing Edge Adjust the mask width at the trailing edge of the image. By increasing the mask width, you can increase the paper margin at the trailing edge of the paper. Press [ ] to increase the mask width and [ ] to reduce it.
  • Page 135 [Machine: Image Quality] Setting values from 1 to 4 are displayed. The nip width increases in the order of 4, 3, 1, 2, where setting value 4 is the smallest and 2 is the largest. Setting Item Max. Value Min. Value Step Unit 01: Nip Width...

  • Page 136: [Machine: Paper Feed/ Output]

    4. Details of Menu Items in Advanced Settings [Machine: Paper Feed/ Output] 1301 [3-Tray LCIT] Fan Setting Specify the movement of the three-tray wide LCT fan. If [On] is selected, air is discharged from the duct in the paper tray. By blowing air between the sheets, sheets stuck to each other can be separated.
  • Page 137 [Machine: Paper Feed/ Output] Setting Item Max. Value Min. Value Step Unit 01: Size: Across: S/ Feed: s/02: Size: Across: S/ Feed: m/03: Size: Across: S/ Feed: l/04: Size: Across: L/ Feed: s/05: Size: Across: L/ Feed: m/06: Size: Across: L/ Feed: l Blower Fan Level Adjust the airflow of the blower fan of the two-tray wide LCT.
  • Page 138 4. Details of Menu Items in Advanced Settings Setting Item Max. Value Min. Value Step Unit 19: Size: Across: S/ Feed: s/20: Size: Across: S/ Feed: m/21: Size: Across: S/ Feed: l/22: Size: Across: L/ Feed: s/23: Size: Across: L/ Feed: m/24: Size: Across: L/ Feed: l Return Fan Level Adjust the airflow of the return fan of the two-tray wide LCT.
  • Page 139 [Machine: Paper Feed/ Output] Setting Item Values 32: Setting [Off] [On] Return Fan Shutter Specify how the return fan shutter of the two-tray wide LCT moves. If this value is set to [On], the shutter is opened and closed each time paper is fed. If this value is set to [Off], the shutter remains open at all time.

  • Page 140: 1321 [Main/3-Tray Lcit/Bypass]

    4. Details of Menu Items in Advanced Settings Paper Feed Mode:Fan Level Adjust the fan operation if double feed or nonfeed occurs in two-tray wide LCT. Setting Item Values 36: Setting [Prevent Double Feed (Weakest Blow)] [Prevent Double Feed (Weaker Blow)] [Standard (Default)] [Prevent Non Feed (Stronger Blow)] [Prevent Non Feed (Strongest Blow)]...

  • Page 141: 1341 [Jam Detection]

    [Machine: Paper Feed/ Output] Fan Level Adjust the fan level of Interposer. Press [ ] to increase the airflow, or [ ] to decrease. Setting Item Max. Value Min. Value Step Unit 02: Setting Pickup Assist Set the operation of the paper feed roller of Interposer. If [On] is set, contact time of the roller is extended.
  • Page 142 4. Details of Menu Items in Advanced Settings Press [ ] to increase the luminance and [ ] to reduce it. Setting Item Max. Value Min. Value Step Unit 02: Setting 15.00 1.00 0.01 None Skew Detection Specify whether or not to detect paper skew. If the machine detects a paper skew when [On] is selected, the machine will stop printing and display a message reporting a paper jam.

  • Page 143: 1351 [Motor Speed]

    [Machine: Paper Feed/ Output] 1351 [Motor Speed] Speed Adjustment Transfer Timing Roller/Paper Transfer Roller/Fusing Belt/Cooling Roller After Fusing/Paper Output/Switchback: Entrance Roller/Switchback: Exit Roller Adjust the speed of each motor. Decurler: Correction Off Adjust the paper feed speed of the decurler unit when 0310 [Correct Output Paper Curl] in the [Adjustment Settings for Operators] menu is set to "Off".
  • Page 144 [Middle] [Low] • With this option, the processing speed of Pro 8300S cannot be changed and is fixed at 96 cpm. • In some cases, if you change this setting from [Low] to [Middle] or from [Middle] to [High], the toner may not properly fuse to the paper.
  • Page 145 [Machine: Paper Feed/ Output] Setting Item Max. Value Min. Value Step Unit 12: Setting • Depending on the fusing unit's temperature and the size of paper, if you increase the interval by pressing [ ], the copy/print speed may decrease.
  • Page 146 MEMO D0BX-7238...
  • Page 148 EN GB EN US EN AU D0BX-7238 © 2019...

This manual is also suitable for:

Pro 8320sPro 8310sPro 8310Pro 8320

Table of Contents

Save PDF