Tono-Pen Avia Tonometer Preparation - Reichert TONO-PEN AVIA User Manual

TONO-PEN AVIA Tonometer Preparation

1. Allow the instrument to thermally stabilize to room
temperature for approximately 30 minutes prior to use.
2. Remove the storage OCU-FILM tip cover from the tip.
3. Visually inspect the tonometer's sensor for cracks, chips
or other irregularities. Do not use if these conditions
are present.
4. Place a new OCU-FILM tip cover over the tip until the ridge
is seated, taking care not to apply the tip cover too tightly
or too loosely
Figure 3. TONO-PEN AVIA Tonometer Preparation
68E3892 Rev. C
.
15