Advertisement
TM
Assembly Instructions and Owners Manual
This pitching machine has been manufactured for years of use. However, proper care and maintenance
must be provided to insure that you get the full potential of this pitching machine. Read the
instructions thouroughly before putting this machine into use. Users must be 18 years old and must be
properly trained.
Inspect all parts of the machine for any damage that may have occurred during shipping. Report any
damage immediately. Save the cartons and packaging materials in case you have to return the machine
for any reason.
Save this manual: Use it to instruct and train others to use the machine.
Do not let anyone use the machine that has not been trained.
MOUND YETI 2 INSTRUCTIONS
1
1-800-463-6865
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Mound Yeti Mound Yeti 2
- Page 1 Save the cartons and packaging materials in case you have to return the machine for any reason. Save this manual: Use it to instruct and train others to use the machine. Do not let anyone use the machine that has not been trained. MOUND YETI 2 INSTRUCTIONS 1-800-463-6865...
-
Page 2: Item Description
Left Wheel Bracket Right Wheel Bracket Hex Bolt 5/16” x 1” Washer 5/16” Lock Nut 5/16” Transport Wheel Hex Bolt 1/2” Hex Nut Spacer 1/2” Lock Nut 1/2” Carriage Bolt 3/8” Motor Controller Pitching Wheel MOUND YETI 2 INSTRUCTIONS 1-800-463-6865... - Page 3 Step 5) Before allowing a batter in the batters box, throw some practice pitches until you have the desired speed and trajectory of the ball consistently in the strike zone see SPEED AND PITCH TYPE ADJUSTMENTS. MOUND YETI 2 INSTRUCTIONS 1-800-463-6865...
-
Page 4: Know Your Machine
To change setting form baseball to softball, remove all 4 nuts and bolts from each wheel and place them in holes marked softball settings. STEP 2: Make sure appropriate ball chute and legs are used for baseball or softball. MOUND YETI 2 INSTRUCTIONS 1-800-463-6865... - Page 5 Plug the surge protector into the generator Plug the pitching machine into the surge protector Turn on the pitching Machine CAUTION: ALWAYS USE A SURGE PROTECTOR WHEN USING A GENERATOR. POWER SURGES CAN DAMAGE THE SPEED CONTROLLERS. MOUND YETI 2 INSTRUCTIONS 1-800-463-6865...
-
Page 6: Speed Control
Set the wheels with approximately a 45 degree angle with the top wheel leaning to the operator’s left side. Set the upper wheel 8 digits faster than the lower wheel, see speed chart as a general guide. MOUND YETI 2 INSTRUCTIONS 1-800-463-6865... - Page 7 MOUND YETI 2 INSTRUCTIONS 1-800-463-6865...
-
Page 8: Important Safety Information
Do not use a cord that is cracked or otherwise damaged. Keep cord away from moving wheels. Be sure cord on ground does not present a tripping hazard. DO NOT TOUCH ROTATING WHEELS Make no adjustments or move the machine until the wheels are completely stopped MOUND YETI 2 INSTRUCTIONS 1-800-463-6865... - Page 9 STEP 1: All 4 bushings must be changed at the same time STEP 2: Unscrew black caps on motors and remove bushings STEP 3: Replace bushings and securely screw on caps. IMPORTANT: CHANGE ALL BUSHINGS AFTER 1800 HOURS OF USE MOUND YETI 2 INSTRUCTIONS 1-800-463-6865...
Need help?
Do you have a question about the Mound Yeti 2 and is the answer not in the manual?
Questions and answers
What size softballs
The Mound Yeti 2 is designed to accommodate both baseballs and softballs, but the exact size of softballs compatible with the machine is not specified in the provided information.
This answer is automatically generated