Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Ti Lite Manuals
  4. Wheelchair
  5. Anti-Tips
  6. Owner's manual

Ti Lite Anti-Tips Owner's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
USER
FRIENDLY
ANTI-TIPS
OWNERS MANUAL
DEALER/SUPPLIER:
THIS MANUAL MUST BE GIVEN TO THE USER OF THESE ANTI-TIPS.
USER:
BEFORE USING THESE ANTI-TIPS, YOU MUST READ THIS MANUAL IN ITS
ENTIRETY AND SAVE IT FOR FUTURE REFERENCE.
ATTENDANTS/ASSISTANTS:
BEFORE ASSISTING THE USER OF THESE ANTI-TIPS, YOU MUST READ
THIS MANUAL IN ITS ENTIRETY AND SAVE IT FOR FUTURE REFERENCE.
OM_UFAT_0308RevA

Advertisement

loading
Need help?

Need help?

Do you have a question about the Anti-Tips and is the answer not in the manual?

Questions and answers

Related Manuals for Ti Lite Anti-Tips

Summary of Contents for Ti Lite Anti-Tips

  • Page 1 USER FRIENDLY ANTI-TIPS OWNERS MANUAL DEALER/SUPPLIER: THIS MANUAL MUST BE GIVEN TO THE USER OF THESE ANTI-TIPS. USER: BEFORE USING THESE ANTI-TIPS, YOU MUST READ THIS MANUAL IN ITS ENTIRETY AND SAVE IT FOR FUTURE REFERENCE. ATTENDANTS/ASSISTANTS: BEFORE ASSISTING THE USER OF THESE ANTI-TIPS, YOU MUST READ THIS MANUAL IN ITS ENTIRETY AND SAVE IT FOR FUTURE REFERENCE.
  • Page 2 USER-FRIENDLY ANTI-TIPS WARNING - READ THIS MANUAL DO NOT OPERATE THESE ANTI-TIPS WITHOUT FIRST READING AND UNDERSTANDING THIS OWNERS MANUAL. IF YOU ARE UNABLE TO UNDERSTAND THE WARNINGS, CAUTIONS AND INSTRUCTIONS, CONTACT YOUR TiLITE DEALER OR TiLITE CUSTOMER SUPPORT AT (800) 545-2266 BEFORE ATTEMPTING TO USE THESE ANTI- TIPS.

  • Page 3: User-Friendly Anti-Tips

    2. If your anti-tips are set too LOW, they may “catch” on obstacles that you can expect to encounter in normal wheelchair use. If this happens, you may tip over and fall. 3. If your anti-tips are set too HIGH, their ability to prevent a backward tip-over will be limited and they may not prevent a tip-over at all.
  • Page 4 USER-FRIENDLY ANTI-TIPS (ALL MODELS) The configuration of the User Friendly Anti-Tips varies among TiLite chair models. The various configurations are shown in Figure 1. Figure 1 User Friendly Anti-Tip Configurations A. ZRA and Aero Z B. TR, YR, TRA and YRA C. ZR D. TX E. 2GX, Aero X, X, SX, Evo, YG and YGS User Friendly Anti-Tip Owners Manual...
  • Page 5 USER-FRIENDLY ANTI-TIPS Engaging the Anti-Tips To engage the user-friendly anti-tip, grip anti-tip receiver firmly and pull it rearward, away from the anti-tip mounting plate, and lower it until it re- engages in the mounting plate in the position shown in Figures 2 or 3. Figure 2 Engaging the Anti-Tipper ZRA, ZR, Aero Z, TR, YR, TRA and YRA...
  • Page 6 USER-FRIENDLY ANTI-TIPS Adjusting the Anti-Tip To adjust the height of the user-friendly anti-tip, press the two release buttons on the telescoping lower tube, then adjust the height of the lower tube so that wheel is within 1-1/2” to 2” off the ground. See Figure 6. Anti-Tip Receiver Removing the Anti-Tip To remove the user-friendly anti-tip extension tube, press the release Release Button Lower Tube buttons on the anti-tip receiver and pull the upper extension tube out of the anti-tip receiver.

  • Page 7: Mounting The User-Friendly Anti-Tip

    USER-FRIENDLY ANTI-TIPS Mounting the User-Friendly Anti-Tip (ZRA and Aero Z) Allen Screws WARNING Mounting the user-friendly anti-tip receiver must be performed by an authorized TiLite dealer or qualified technician. If you ignore this warning, you may fall, tip over or lose control of the wheelchair and Anti-Tip seriously injure yourself or others or damage the wheelchair.
  • Page 8 USER-FRIENDLY ANTI-TIPS WARNING: Before sitting in the chair, make sure that the anti-tips are operating properly. To do this, place the chair on a level surface and engage the anti-tips. Tip the chair backward until the weight of the chair is supported by the anti-tips and rear wheels.
  • Page 9 Tip” above. WARNING: Before sitting in the chair, make sure that the anti-tips are operating properly. To do this, place the chair on a level surface and engage the anti-tips. Tip the chair backward until the weight of the chair is supported by the anti-tips and rear wheels.
  • Page 10 Tip” above. WARNING: Before sitting in the chair, make sure that the anti-tips are operating properly. To do this, place the chair on a level surface and engage the anti-tips. Tip the chair backward until the weight of the chair is supported by the anti-tips and rear wheels.
  • Page 11 Tip” above. WARNING: Before sitting in the chair, make sure that the anti-tips are operating properly. To do this, place the chair on a level surface and engage the anti-tips. Tip the chair backward until the weight of the chair is supported by the anti-tips and rear wheels.
  • Page 12 Anti-Tip Receiver wheelchair. NOTE: Unless you ordered user-friendly anti-tips when you originally Anti-Tip ordered your TiLite SX, X, Evo, YG or YGS you will need to order Mounting Plate replacement Allen Screws when ordering user-friendly anti-tips.
  • Page 13 To do this, place the chair on a level surface and engage the anti-tips. Tip the chair backward until the weight of the chair is supported by the anti-tips and rear wheels. Apply sufficient pressure to ensure that the anti-tips are operating properly.
  • Page 14 To do this, place the chair on a level surface and engage the anti-tips. Tip the chair backward until the weight of the chair is supported by the anti-tips and rear wheels. Apply sufficient pressure to ensure that the anti-tips are operating properly.
  • Page 15 To do this, place the chair on a level surface and engage the anti-tips. Tip the chair backward until the weight of the chair is supported by the anti-tips and rear wheels. Apply sufficient pressure to ensure that the anti-tips are operating properly.