Table of Contents
Advertisement
Customizing your CLIÉ handheld
Wait For Prompt: Detects a challenge-response prompt coming from the server and then displays
the dynamically generated challenge value. You then enter the challenge value into your token card,
which in turn generates a response value for you to enter on your CLIÉ handheld. This command
takes two arguments, separated by a vertical bar (|) on the input line.
Send: Transmits specific characters to the TCP/IP server to which you are connecting.
Send CR: Transmits a carriage return or LF character to the TCP/IP server to which you are connecting.
Send User ID: Transmits the User ID information entered in the User ID field of the
Network Preferences screen.
Send Password: Transmits the password entered in the Password field of the
Network Preferences screen. If you did not enter a password, this command prompts you to enter
one. The Password command is usually followed by a Send CR command.
Delay: Tells your CLIÉ handheld to wait a specific number of seconds before executing the next
command in the login script.
Get IP: Reads an IP address and uses it as the IP address for your CLIÉ handheld. This command is used
with SLIP connections.
Prompt: Opens a dialog box and prompts you to enter text of some kind (for example, a password
or a security code).
End: Identifies the last line in the log in script.
5
Repeat step 4 until the log in script is complete.
6
Tap OK.
7
Tap OK again.
n N
116
Advertisement
Table of Contents
