Advertisement
Main Features:
1. Compact design for laptop users
2.Cherry MX switches inside
3. Arbitrary programming key-code and LED colors
4. Build in 4 layers for programming
5. PBT DSA profile keycaps with Dye-Sublimated technology
6. Anodized CNC-machined aluminum case (Narrow bezel)
7. Detachable Micro USB cable
Package Content :
1. Keyboard x 1
2. Micro USB Cable x 1
3. Extra Mac & RGBY modifiers keycap
http://amazon.com/Vortexgear
https://amazon.ca/Vortexgear
Race 3 User Manual
or
https://vortexgear.us
or
https://vortexgear.ca
Advertisement
Table of Contents
Related Manuals for Vortexgear Race 3
Summary of Contents for Vortexgear Race 3
- Page 1 Race 3 User Manual Main Features: 1. Compact design for laptop users 2.Cherry MX switches inside 3. Arbitrary programming key-code and LED colors 4. Build in 4 layers for programming 5. PBT DSA profile keycaps with Dye-Sublimated technology 6. Anodized CNC-machined aluminum case (Narrow bezel) 7.
- Page 2 ➢ Some keys need to set their own ❖ Linux: Pn + L ➢ Caps lock interchangeable with L_Ctrl 2. Switch Keyboard Layout: a) QWERTY: Fn + Home b) COLEMAK: Fn + PgUp c) DVORAK: Fn + PgDn http://amazon.com/Vortexgear https://vortexgear.us https://amazon.ca/Vortexgear https://vortexgear.ca...
- Page 3 Reset the current layer key-codes: Fn + R c) Reset all layers’ key-codes and restore to default: L_Alt + R_Alt d) Swap Fn position: Hit Fn + L_Alt for 3 seconds then select new Fn key location directly http://amazon.com/Vortexgear https://vortexgear.us https://amazon.ca/Vortexgear https://vortexgear.ca...
- Page 4 Light effect speed up RGB LEDs edit descriptions: The RGB Race 3 has a total of 3 layers to edit the LEDs Step 1. Choose a layer (Fn+<,> or ? key) you want to edit. Step 2. Press Pn + 9 or 0 to enter the edit mode.
Need help?
Do you have a question about the Race 3 and is the answer not in the manual?
Questions and answers
How to reset back to basic layout? I’m in a position where commands C & V do not copy and paste but give unknown characters.
To reset the Vortexgear Race 3 keyboard to its basic layout, follow these steps:
1. Reset a specific layer (L1-L3):
- Press and hold Fn + R until the left space bar LED flashes white for 5 seconds.
- Release the keys to erase any programming on the current layer.
2. Reset the entire keyboard (except L0):
- Press and hold both Alt keys until the left space bar LED flashes white for 5 seconds.
- Release the keys to erase all programming except for the default layer (L0).
This answer is automatically generated