Table of Contents
Advertisement
Note: In case of AC adapter connected to the unit, this will be always indicated by at least
one LED ON or blinking, even if the battery is missing or fully charged when the unit is OFF.
Note To maximize the performance and the life of your battery, it is worth to deplete the
battery charge to less than 10% every two weeks.
To deplete the battery, use your CliniScape on battery power only until you hear a
notification from the Operative system that the battery charge is less than 10%.
The below table indicates the three LED behaviour (Battery LEDs and Power LED).
BATTERY
CONDITION
CHARGED (on battery)
OR
FULLY CHARGED (on
AC adapter)
CHARGING
(Not Critical)
CHARGING
(Critical)
NOT
CHARGING
(Critical)
BATTERY
NOT
PRESENT
(MCA connected to
AC Adapter)
WARM SWAP
Table 4 - LED status and battery conditions vs. MCA status
MCA STATUS
OFF / Hibernate (on battery)
OFF / Hibernate (On AC adapter)
ON
Stand-by
OFF / Hibernate
ON
Stand-by
OFF / Hibernate
ON
Stand-by
OFF / Hibernate
ON
Stand-by
OFF / Hibernate
ON
Stand-by
Suspend to RAM
Battery Good
OFF
OFF
ON
OFF
OFF
ON
OFF
OFF
50% Blinking
OFF
OFF
OFF
OFF
OFF
50% Blinking
50% Blinking
OFF
24
Power
Battery Empty
Standby
OFF
OFF
OFF
20% Blinking
OFF
ON
OFF
50% Blinking
ON
OFF
ON
ON
ON
50% Blinking
ON
OFF
ON
ON
ON
50% Blinking
OFF
OFF
50% Blinking
ON
50% Blinking
50% Blinking
OFF
10% Blinking
50% Blinking
ON
50% Blinking
50% Blinking
OFF
OFF
ON
Advertisement
Table of Contents
