Table of Contents
Advertisement
CLI Reference Guide
Chapter 10
DHCP Relay
Table 9: DHCP Relay Commands
clear:
clear < statistics >
Syntax:
statistics The parameter let you to clear DHCP relay statistics
Parameter :
EXAMPLE:
Switch(dhcp-relay)# clear statistics
Switch(dhcp-relay)#
mode:
mode disable/ enable
Syntax:
disable The parameter means you to disable DHCP relay mode.
Parameter :
Enable The parameter means you to enable DHCP snooping mode.
EXAMPLE:
DHCP Relay Commands of the CLI
The section describes how to forward DHCP requests to another specific
DHCP server via DHCP relay. The DHCP servers may be on another
network.
Command
Function
clear
Clear DHCP relay statistics
mode
Configure DHCP relay mode
relay-option
Configure DHCP relay agent information option
server
Configure DHCP relay server
show
Show DHCP relay information
The command lets you clear the DHCP relay statistics
that you set on the switch.
The command lets you configure the DHCP relay mode
on the switch.
When enable DHCP relay mode operation, the agent
N
:
OTE
forward and to transfer DHCP messages between the clients
and the server when they are not on the same subnet domain.
And the DHCP broadcast message won't flood for security
considered.
- 36 -
Copyright @ 2013 by Signamax, Inc.
Publication date: Feb., 2013
Revision A1
Advertisement
Table of Contents
