Iii.3 Bottom Side (Factory Default Switch) - Prodys QLST Hardware And Reference Manual

III.3 Bottom side (Factory default switch)

At the bottom side, a small open gap, allows access to an octal microswitch.
By default all the switches must be in OFF position according the picture.
Switch number 7 will restore the default
set ON before a power cycle.
The IP address is changed to a DHCP IP configuration. In case a
DHCP server is not available on the network the address is set to
192.168.100.100 and the net mask to 255.255.255.0.
After the factory default setting the switch number 7 must return to the OFF
position for usual operation.
Prodys S.L. Tel: +34 91 6896880  Fax: +34 91 6943777  Email:
ON
OFF
factory configuration
sales@prodys.net
Page 15
if
 Web:
www.prodys.com