Advertisement
Quick Links
Advertisement
Summary of Contents for Prime Engineering GRANDSTAND III
- Page 1 OWNER’S MANUAL PRODUCT PHOTO PARTS LIST ASSEMBLY INSTRUCTIONS FITTING & ADJUSTING DAILY USAGE ACCESSORIES MAINTENANCE WARRANTY Prime Engineering ® GRANSTAND Modular Standing System Manufactured By Prime Engineering A Division of Axiom Industries, Inc. 020102GSIIIOM...
- Page 2 PRIME ENGINEERING GRANSTAND III MSS A note from the President: Prime Engineering’s lead in standing frame technology was developed from my personal need for a standing device. With no suitable product on the market to really answer the needs of proper positioning while standing, the necessity for safety, comfort and proper standing inspired us to build our first standing frame…...
-
Page 3: Prime Engineering
PRIME ENGINEERING GRANSTAND III MSS HYDRAULIC STANDING FRAME Table Top Chest Pad Pump Handle Lift Arm Kneepad Leg Release Pin Expandable Frame Leg Footpads Casters Granstand III MSS OWNER’S MANUAL - 3 - PRIME ENGINEERING... -
Page 4: Parts List
In addition to the tools supplied, you will need the following: 1 – 1/2” Open end wrench 1 – 7/16” Open end wrench 1 – 9/16” Open end wrench 1 – 9/16” Socket Granstand III MSS OWNER’S MANUAL - 4 - PRIME ENGINEERING... - Page 5 Make sure that poles are high enough to clear lift arms when tray is installed. (Figure 5) Figure 4 Figure 5 Granstand III MSS OWNER’S MANUAL - 5 - PRIME ENGINEERING...
- Page 6 Insert standard footpad assembly into upright foot tube and tighten black tri-knob. (Figure 14) Figure 10 Figure 11 Figure 12 Figure 13 Figure 14 Granstand III MSS OWNER’S MANUAL - 6 - PRIME ENGINEERING...
- Page 7 The chest pad depth adjustment brackets may be inverted for additional height range settings. Figure 17 Granstand III MSS OWNER’S MANUAL - 7 - PRIME ENGINEERING...
- Page 8 If your unit is equipped with any of our optional foot systems, skip the above step and refer to the instructions that are included with the foot system you received. Figure 19 Figure 20 Figure 21 Granstand III MSS OWNER’S MANUAL - 8 - PRIME ENGINEERING...
- Page 9 (Figure 23) Chest Pad Height: Loosen the 5/16 – 18 rosette knob and raise or lower your chest pad to the desired location, securely tighten rosette knob. (Figure 24) Figure 24 Granstand III MSS OWNER’S MANUAL - 9 - PRIME ENGINEERING...
-
Page 10: Daily Usage
7. Center your knees into the kneepads. (Figure 27) Note: Make sure that your knees are in contact with the kneepads before you start to activate the pump. Figure 27 Granstand III MSS OWNER’S MANUAL - 10 - PRIME ENGINEERING... - Page 11 Never pull up on the Lift Arms. This will force air into the Hydraulic Pump and can cause it to function improperly and voiding the warranty. ALWAYS pump the Lift Arms up to raise Figure 30 them. Granstand III MSS OWNER’S MANUAL - 11 - PRIME ENGINEERING...
- Page 12 CONTOURED BODY PAD WITH LATERALS AND SUPPORT STRAP Complete upper body support system supplies additional upper body support with forward, side to side and posterior support. Granstand III MSS OWNER’S MANUAL - 12 - PRIME ENGINEERING...
- Page 13 Secures lower extremity positioning with Velcro adjustment. CHEST STRAP Nylon webbed strap attaches to chest pad and supplies additional upper body support. PADDED CHEST STRAP Supplies additional padded upper body support when needed. Granstand III MSS OWNER’S MANUAL - 13 - PRIME ENGINEERING...
-
Page 14: General Maintenance
4. DO NOT attempt to make any adjustments while standing in your Granstand III MSS. 5. All fabrics should be hand washed with mild soap and water, then allowed to air dry. Granstand III MSS OWNER’S MANUAL - 14 - PRIME ENGINEERING... - Page 15 / user or their agent, and received by Prime Engineering at its address set forth on the registration form no later than three months after the original purchase date.
Need help?
Do you have a question about the GRANDSTAND III and is the answer not in the manual?
Questions and answers