Hitachi 220H Bios Manual page 58

The following table shows description of menu items.
Table 1-29: Boot menu items
Menu items
Boot Configuration
Setup Prompt Timeout
Bootup NumLock State
Quiet Boot
Boot Option Priorities
Clear
Boot Option Priorities
Boot Option #1
Boot Option #2
Boot Option #3
CD/DVD ROM Drive BBS
3
Priorities
Hard Drive BBS
3
Priorities
Network Device BBS
4
Priorities
Floppy Drive BBS
3 5
Priorities
Notes:
1 A value in square brackets, [ ], shows the default.
2 If you set Advanced>LAN1 PXE OpROM or LAN2 PXE OpROM, PXE boot is enabled. BRCM MBA
Slot 0x0X ... item is displayed in the Boot Option Priorities when PXE boot is enabled.
3 These items' display order is changed by configuration of the system unit.
4 This item is displayed when you set Advanced>LAN1 PXE OpROM or LAN2 PXE OpROM, PXE boot
is enabled.
5 This item is displayed when you connect an external floppy disk drive to the system unit.
1-50
Selection
[1]

1-65535

[On]

Off

[Disabled]

Enabled

[No]

Yes

2
[P4: xxxxxxxx ...]

[(Bus xx Dev xx)

PCI ...]
[Built-in EFI Shell]

-
-
-
-
System BIOS
Hitachi Compute Rack 210H/220H BIOS Guide
1
Sets the display time of the setup prompts during
Power On Self Test (POST).
This item setting must be 1 to 10.
Sets the numlock state at boot up.
Sets whether to suppress messages during boot
up.
Sets to clear the boot device priority settings.
Sets priorities of the boot devices.
Displays the CD/DVD ROM Drive BBS Priorities
submenu.
See CD/DVD ROM Drive BBS Priorities
details.
Displays the Hard Drive BBS Priorities submenu.
See Hard Drive BBS Priorities
Displays the Network Device BBS Priorities
submenu.
Displays the Floppy Drive BBS Priorities submenu.
Description
for the
for the details.