Important Information; Step: Configuring The Axes With S7T Config - Siemens SIMATIC S7 300 PLC Getting Started

3.10

10. Step: Configuring the axes with S7T Config

3.10

Important information

In this step, you create your technology objects (e.g. axes) with S7T Config. Use
"Technology Objects Management" to generate a technology DB for each TO. Do not copy
the technology DBs in order to ensure a defined assignment between the technology DB and
its TO.
Procedure
Sequence Activity
1 In the project navigator, open the tree structure SIMATIC 300(1) > Technology > AXES. Double-click
"Insert axis" to start the axis wizard:
Result: The "Insert Axis" dialog box opens.
CPU 317T-2 DP: Controlling a SINAMICS S120
Getting Started, 12/2005, A5E00480391-01
3.10 10. Step: Configuring the axes with S7T Config
Result
Learning units
3-59