Components And Setup; Heat Distribution Station Ecotouch Ai1 Air; Construction And Controlling; Electronic Heat Pump Control - WATERKOTTE EcoTouch Ai1 Air Planning And Installation

Components and setup

4 Components and setup

4.1 Heat distribution station EcoTouch Ai1 Air

4.2 Construction and Controlling

4.3 Electronic heat pump control

05.06.2015
Copyright  2013 by: WATERKOTTE GmbH. Subject to changes.
All components of the heat distribution station are mounted in a protective
steel plate housing which is intended for setup inside. The base frame
consists of a edged, thick-walled sheet steel. Together with the rear panel
frame – which also consists of thick-walled sheet steel – it forms a unit.
Side panels, cover, front and the tilt-mounted, ergonomic control panel
can be removed.
All enclosure components are reliably and permanently protected by
powder-coating and stove enamel finish.
The domestic hot water tank has a 204 l capacity, is composed of stainless
steel and is completely insulated.
The EcoTouch Ai1 Air series is a complete hot water heating system with
integrated central hot water supply, consisting of heat generator (heat
pump), heat source system, electrical heating element for start-up and
stand by, electrical control, domestic hot water tank made of stainless steel
(204 l, insolated with integral foam), complete electrical and control engi-
neering, touch display with Easy-Con Software, smartphone control via
Easy-Con Mobile software, diagnosis system.
All hydraulic connections are placed on the back side. All modules in the
framework are law vice fitted with removable, heat and sound insulated
housing, color signal white (RAL 9003) or stainless steel.
The heat pump control is included in the delivery scope of the
WATERKOTTE heat pump.
Use in other than WATERKOTTE heat pumps will void any warranty claim.
The control is used to control and monitor heating systems that are operat-
ed with WATERKOTTE compact heat pumps according to technical guide-
lines of WATERKOTTE Wärmepumpen GmbH.
The following tasks are performed: everything to do with regulation (de-
pending on the external temperature with pilot room guidance), control,
monitoring, self-diagnosis, saving of data in cases of breakdown.
WATERKOTTE explicitly states that function warranty will become void if
used on systems not approved by WATERKOTTE. Any liability for conse-
13 / 80