Sony MZ-R37 Analog PCLink Operating Instructions Manual page 22

3
Press ENTER.
4
Press = or + ((•+ on the
remote control) repeatedly to select a
letter and press ENTER to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
Press
CAPS
VOL +/–
=/+
INSERT
DELETE
p
CANCEL
5
Repeat step 4 and enter all characters
of the label name.
6
Keep pressing ENTER for 2 seconds
or longer.
The track or disc is labeled.
Labeling a track during playback
1
Insert a disc and play the track you
want to label.
2
Keep pressing EDIT for 2 seconds or
longer.
" " "Name" flashes in the
display.
22-
GB
To
Switch between capital
letters, small letters, and
marks/numbers.
Move the cursor to the
left or right.
Change the letter to the
one before/next one.
Insert a blank space to
type in a new letter.
Delete a letter and move
back all following letters
to the left.
Cancel labeling.
Cancel labeling.
3
Press ENTER.
The track is ready to be labeled.
4
Follow steps 4 to 6 of "Labeling a disc
during stop" above.
Labeling a track or a disc during
recording
1
Keep pressing EDIT for 2 seconds or
longer during recording.
" " "Name" flashes in the display.
2
To label a track, press ENTER.
To label a disc, press = or +
((•+ on the remote control)
repeatedly until "
flashes in the display, then press
ENTER.
3
Follow steps 4 to 6 of "Labeling a disc
during stop" above.
To cancel labeling, press CANCEL.
Available characters
• Capital and small letters of the English
alphabet
• Numbers 0 to 9
• ! " # $ % & ( ) * . ; < = > ?
@ _ ` + – ' , / : _ (space)
To relabel recordings
Follow the steps corresponding to the
labeling method until the disc or track is
ready to be labeled. Enter a new character
over the one you want to change, then
keep pressing ENTER for 2 seconds or
longer.
Notes
•You cannot relabel premastered MDs or
label MDs that have not been recorded.
•The recorder is able to display, but cannot
label using, Japanese "Katakana"
characters.
" "Name"