KX-TDE200GR 1 Safety Precautions 1. Before servicing, unplug the power cord to prevent an electric shock. 2. When replacing parts, use only the manufacturer's recommended components for safety. 3. Check the condition of the power cord. Replace if wear or damage is evident.
KX-TDE200GR 2.3. About Lead Free Solder (PbF: Pb free) Note: In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that con- tains lead. We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin, (Sn), Silver, (Ag), and Copper, (Cu).
KX-TDE200GR 3 Specifications 3.1. General Description Control Bus Original bus (16 bit, 8 MHz,10 megabytes per second) Communication Bus H.100 bus conformity (1024 time slot) Switching Non Blocking Power Input PSU-S 100 V AC to 130 V AC; 1.4 A/200 V AC to 240 V AC; 0.8 A; 50 Hz/60 Hz PSU-M 100 V AC to 130 V AC;...
KX-TDE200GR 4.2. IPCMPR Card Circuit Operation 4.2.1. IPCMPR Card 4.2.1.1. Outline 1) Function • System Control • Circuit Switching (includes gain adjustment function) • Conference Call (3 people x 8 ~ 8 people x 3) • MOH • PAGING • Clock 2) Configuration •...
Page 11
KX-TDE200GR 4.2.2. Description of Each Part LED Lamp (BATT ALARM): Turns on to indicate the dropping of the lithium battery voltage (less than 2.8V). LED Lamp (SD ACCESS): Turns on when the SD card is accessing. SD card slot: Mounts the system program SD card.
Page 12
KX-TDE200GR 4.2.3. Circuit Description 4.2.3.1. Outline of Block Description • CPU2 block (BLOCK1) This block operates the main unit control. Besides this operates various controls, select signal generation, DMA control and serial port control. This contains the built-in clock function.
Page 13
KX-TDE200GR • NEXUS ( + SRAM ) block (BLOCK 8) This provides the communication function between each option card, call control (TSW function), conference call, tone genera- tion and gain control function. Configuration: IC1303(ASIC(NEXUS)), IC1302, X1301,IC1301(SRAM) , CN1301(RMT card connector) and so on.
Page 14
KX-TDE200GR • POWER block (BLOCK 13) This consists of DC/DC converter circuit and various regulators. Configuration: IC1901 ( 3.3V, 2.5V DC/DC converter ), IC1902 ( 1.25 DC/DC converter ), IC1908 (1.8V regulator), IC1907 (1.2V regulator), IC1903 (Comparator), Q1901, Q1902, Q1903 (FET, transistor), B1901, IP1901 (circuit protection device) and so on.
KX-TDE200GR Back Board Circuit Operation 4.3. The back board (BB) connects signals between all cards in KX-TDE200. It also supplies power from the power supply unit to the cards. CONNECTORS EXPLANATION (1) Power Supply Unit Connector: CN100 (2) Free Slot Connectors: CN102-CN106...
KX-TDE200GR 4.4. Outline 4.4.1. General Description The control system of this unit is composed of the main control section (IPCMPR) controlling the entire system, exchanging voice data, the circuit control section (LPR) controlling various telephone lines and the power supply section (POWER).
Page 17
KX-TDE200GR 4.4.5. System Control 4.4.5.1. System Control Block Diagram...
Page 18
KX-TDE200GR 4.4.5.2. Voice (TDM Highway) Bus Block Diagram...
Page 19
KX-TDE200GR 4.4.5.3. Voice Bus Logical Assignment 4.4.5.4. Back Board Signaling Back board waveform of TDM bus for voice...
Page 20
KX-TDE200GR 4.4.6. Back Board Signal Connection Diagram 4.4.6.1. CT Bus System Connection Diagram...
Page 21
KX-TDE200GR 4.4.6.2. EC Bus System Connection Diagram...
Page 22
KX-TDE200GR 4.4.6.3. System Control and Analog Signal Connection Diagram 4.4.6.4. Power Supply System Connection Diagram...
KX-TDE200GR 6 Installation Instructions 6.1. System Overview ystem 6.1.1. Configurations...
Page 25
KX-TDE200GR ystem 6.1.2. Components Category Model No. Description Shelves KX-TDE200GR Basic Shelf Main Processing Card KX-TDE0101GR IP Convergence Main Processing Card IPCMPR Option Cards KX-TDE0110 16-Channel VoIP DSP Card (DSP16) KX-TDE0111 64-Channel VoIP DSP Card (DSP64) KX-TDA0196 Remote Card (RMT)
Page 26
• SLT → Single Line Telephone Notice: • Some optional service cards and features are not available for certain countries/areas. Consult your certified Panasonic dealer for detailed instructions. • This PBX supports SIP Extensions. However, some PBX features may not be available for SIP Extensions, depending on your telephone type.
Page 27
KX-TDE200GR 6.1.3. System Connection Diagram...
Page 28
KX-TDE200GR *Only 1 Server PC can be connected to the Hybrid IP-PBX.Two or more Server PCs cannot be used simultaneously.
KX-TDE200GR 7 Operation Instructions 7.1. Type and Maximum Number of Slots The PBX supports the following type and number of slots. Slot Type KX-TDE200 IPCMPR Card Slot Free Slot Virtual Slot Virtual Trunk Slot Virtual Extension Slot IPCMPR Card Slot and Free Slot...
KX-TDE200GR 7.2. Maximum Optional Service Cards The following number of cards can be installed in the Free Slots or Virtual Slots of the PBX. Note: • Any card that exceeds the capacity of the PBX will be ignored. • When the PBX starts up with an invalid configuration, some cards will be ignored.
KX-TDE200GR 7.3. Maximum Trunk and Extension The PBX supports the following number of trunks and extensions. Type KX-TDE200 Total Number of Trunk Trunk (Physical Trunk Card) Trunk (Virtual Trunk Card) Total Number of Extension Extension (Physical Extension Card) Extension (Virtual Extension Card)
KX-TDE200GR 7.5. Power Supply Unit Selection The PBX needs a power supply unit (PSU) suitable for its configuration. Calculate the load figure from the type and number of items of equipment to be connected, and determine the type of PSU that will be required.
KX-TDE200GR 8 Test Mode 8.1. Utility 8.1.1. Utility-Diagnosis Performs diagnostic tests on cards installed in the PBX, to identify the source of problems. There are 2 types of test, Card Test and Pair Port Test. If any of the tests listed here returns the result "NG" ("No Good"), contact your dealer. Test results can be saved as a TXT-format (text) file.
Page 34
KX-TDE200GR 8.1.1.2. Pair Port Test Tests the combination of an extension port and trunk port to ensure that communication with the trunk port can be carried out successfully. The pair port test can be carried out using one LCOT card and one DHLC, SLC8, SLC16 or MSLC16 card.
Page 35
KX-TDE200GR LPR Program Name on SD Memory Card Corresponding Card PCSINF CSIF PDHLC DHLC8/DLC8/DLC16 PSLC SLC8 PIPGW IP-GW4 (KX-TDA0480) PIPGWH IP-GW4 (KX-TDA0484) PIPGW16 IP-GW16 PPRI23 PRI23 POPB3 PIPEXT IP-EXT16 PVOIPEX IP-EXT16 CS Program Name on SD Memory Card Corresponding Card PCS24G CS using a CSIF card for 2.4 GHz Portable Station...
Page 37
KX-TDE200GR 8.1.1.5. Utility-SD Card File View and Load Displays a list of files on the SD memory card, and allows you to update the programs stored in LPR cards (cards with local pro- cessors) and Cell Stations (CSs). This option is only available at Installer level.
Page 38
KX-TDE200GR 8.1.1.7. Utility-Message File Transfer PC to PBX Transfers Outgoing Message (OGM) files from the PC to the selected MSG card. This option is only available at Installer level, and requires that at least 1 MSG card is installed. The OPB card that it is mounted on must be set to OUS status.
Page 39
KX-TDE200GR 8.1.1.9. Utility-Error Log Collects and displays system error information. Whenever there is a system failure, the PBX stores the error code generated. The connected PC collects all of these codes, along with other information, and displays an explanatory error message.
Page 40
KX-TDE200GR 8.1.1.10. Utility-T1 Signaling Bit Monitor Displays reference signaling bit information for all channels of the T1 card, by monitoring sent and received A, B, C and D bits. This utility is intended for use by dealers. This option is only available at Installer level, and requires that the target T1 card be set to INS status.
Page 41
KX-TDE200GR 8.1.1.13. Utility-Digital Trunk Error Report Displays accumulated information on various types of errors occurring on digital CO lines. This option is only available at Installer level. The value displayed for each error item is the number of times that each error occurred during the time period selected. Average values for these items vary depending upon many factors, such as the equipment being used, and the distance from the tele- phone company.
Page 42
KX-TDE200GR 8.1.1.15. Utility-CS Information Displays information stored by the PBX regarding each Cell Station (CS). This option is only available at Installer level, and requires that the target CSIF, DHLC or DLC card be set to INS status. The displayed items are as follows:...
Page 43
KX-TDE200GR 8.1.1.17. Utility-Ping Performs a connection test on network devices. This function sends echo requests to a particular IP address across an IP net- work, and displays the result of responses and round-trip time. This option is only available when the KX-TDE Maintenance Console is in Interactive mode.
Page 44
KX-TDE200GR 8.1.1.19. Utility-Refresh Activation Key Allows you to enable the activation keys (except for the Activation Key for Software Upgrade to Enhanced Version) without resetting the PBX. This utility recounts the number of available activation keys, and refreshes the system data accordingly. To enable the activation keys, it is necessary to change the card status of all virtual cards to OUS, then back to INS.
Page 49
KX-TDE200GR 9.1.1.1. Main alarm light turns on...
Page 50
KX-TDE200GR 9.1.1.2. SD card access light does not flash...
Page 51
KX-TDE200GR 9.1.1.3. The battery alarm indication light turns on 9.1.1.4. Main power indication light flashes 9.1.1.5. Main alarm indication light flashes...
KX-TDE200GR 11 Disassembly and Assembly Instructions 11.1. IPCMPR Card 1. Remove the Lid by sliding it in the direction of the arrow 1. 2. This will be removed if the user attaches the Pad Lock as shown in a Fig.1.
KX-TDE200GR 11.2. Back Board 1. Remove four Screws (A). 2. Remove the Left Side Cover and the Right Side Cover. 3. Remove the Hook. And remove the Top Cover. 4. Remove nine Screws (B). 5. Remove the Back Cover.
Page 69
KX-TDE200GR 6. Remove the RS-232C Connector and LED Connector from the Back Board 1. 7. Remove eight Screws (C). 8. Remove the Back Board 1. 9. Remove the LED Connector from the Back Board 2. 10. Remove the Screw (C).
KX-TDE200GR 12.2. How To Replace a Flat Package IC Even if you do not have the special tools (for example, a spot heater) to remove the Flat IC, with some solder (large amount), a sol- dering iron and a cutter knife, you can easily remove the ICs that have more than 100 pins.
KX-TDE200GR 15 Appendix Information of Schematic Diagram Note: 1. DC voltage measurements are taken with an oscilloscope or a tester with a ground. 1. The schematic diagrams and circuit board may be modified at any time with the development of new technology.
Page 118
KX-TDE200GR Pin No. Pin Name Function VDDQ I/O VDD VSSQ I/O GND VSSQ I/O GND VSSQ-PCI PCI I/O GND Open Open Internal GND INTA# PCI interrupt A Address bus Address bus Address bus VSSQ I/O GND Address bus Address bus...
Page 119
KX-TDE200GR Pin No. Pin Name Function Data bus Data bus Data bus Data bus Data bus Data bus Data bus Data bus RD#/FRAME# Read strobe/MPX interface cycle frame CS2# Chip select 2 CS0# Chip select 0 VDD-PLL3 PLL3 VDD VSS-PLL1...
KX-TDE200GR 16.4. Replacement Parts List Note: Ref. Part No. Part Name & Description Remarks 1. RTL (Retention Time Limited) PSKV1017Y1 COVER, SIDE (L) ABS-5V The marking (RTL) indicates that the Retention Time is PSMD1035Z FRAME, SIDE limited for this item.
Page 124
KX-TDE200GR 16.4.3. Main Board Parts Ref. Part No. Part Name & Description Remarks D2202 MA143 DIODE(SI) D2203 MA143 DIODE(SI) Ref. Part No. Part Name & Description Remarks D2204 MA143 DIODE(SI) (ICS) (BATTERY) IC101 C2DBYY000111 B1901 CR23541GUF BATTERY IC102 C0JBAZ002433 IC103...
Page 125
KX-TDE200GR Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R1007 EXB28V330 RESISTOR ARRAY, 33 L1506 PFVF1A471SG CERAMIC FILTER R1008 EXB28V330 RESISTOR ARRAY, 33 L1507 PFVF1A471SG CERAMIC FILTER R1009 EXB28V330 RESISTOR ARRAY, 33...
Page 126
KX-TDE200GR Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C524 ECJ0EF1C104Z C607 ECJ0EF1C104Z C525 ECJ0EF1C104Z C608 ECJ0EF1C104Z C526 ECJ0EF1C104Z C609 ECJ0EF1C104Z C527 ECJ0EF1C104Z C610 ECJ0EF1C104Z C528 ECJ0EF1C104Z C611 ECJ0EF1C104Z C529 ECJ0EF1C104Z C612...
Page 127
KX-TDE200GR Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C1011 ECJ0EF1C104Z C1317 ECJ0EF1C104Z C1012 ECJ0EF1C104Z C1318 ECJ0EF1C104Z C1013 ECJ2FF1A106Z C1319 ECJ0EF1C104Z C1014 ECJ0EB1A104K C1320 ECJ0EF1C104Z C1015 ECJ0EB1A104K C1321 ECJ0EF1C104Z C1018 ECJ0EF1C104Z C1322...
Page 128
KX-TDE200GR Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C1901 ECJ0EB1C153K 0.015 C2220 ECJ0EB1A104K C1902 ECUV1H104ZFV C2221 ECJ0EB1A104K C1903 F1G1H3320004 0.0033 C2222 ECJ0EB1A104K C1904 ECJ0EF1C104Z C2223 ECJ1VB1H223K 0.022 C1905 ECJ0EF1C104Z C2224 ECJ1VB1H223K 0.022...
Page 129
KX-TDE200GR Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C4088 ECJ0EF1C104Z R200 ERJ2GEJ220 C4089 ECJ0EF1C104Z R205 ERJ2GE0R00 C4100 ECJ0EF1C104Z R206 ERJ2GE0R00 C4101 ECJ0EF1C104Z R207 ERJ2GE0R00 C4102 ECJ0EF1C104Z R208 ERJ2GEJ330 C4103 ECJ0EF1C104Z R209...
Page 130
KX-TDE200GR Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R840 ERJ2GE0R00 R1301 ERJ2GEJ102 R841 ERJ2GEJ103 R1302 ERJ2GEJ103 R842 ERJ2GEJ103 R1303 ERJ2GEJ103 R843 ERJ2GEJ102 R1305 ERJ2GEJ103 R1001 ERJ2GEJ330 R1306 ERJ2GEJ103 R1004 ERJ2GEJ103 R1307...
Page 131
KX-TDE200GR Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R1531 ERJ2GEJ105 R1712 ERJ2GEJ100 R1532 ERJ2GEJ222 2.2K R1714 ERJ2GEJ100 R1533 ERJ2GEJ222 2.2K R1716 ERJ2GEJ100 R1534 D0GA223JA021 R1717 ERJ2GEJ100 R1535 D0GA223JA021 R1718 ERJ2GEJ100 R1536...
Page 132
KX-TDE200GR Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R2228 ERJ2GEJ472 4.7K C109 ECUV1C104ZFV R4001 PQ4R10XJ000 C110 ECUV1C104ZFV R4002 PQ4R10XJ000 C111 ECUV1C104ZFV R4003 PQ4R10XJ000 C201 PQCUV1A225ZF R4004 PQ4R10XJ000 C202 ECUV1C104ZFV C203 ECUV1C104ZFV...