Cleaning The Scanner - Samsung SF-555P Disassembly Instructions Manual

Samsung SF-555P Toner Cartridges
26) Replace the fuse on the top of the cartridge with a new 63mA fuse. The fuse should be taped in place to it
does not fall off. See Figure 30
Running a cleaning page
The SF-555P has the ability to run it's own cleaning page. This page according to Samsung will clean any toner
particles off the drum that may be stuck there.
Press the SETUP key on the front panel.
Press the Right or Left ARROWS until "MAINTENANCE" appears.
Press the START/ENTER key.
The display will show "CLEAN DRUM"
Press the START/ENTER key.
A Cleaning page will then print.

Cleaning the Scanner

These machines can also be adjusted for a dirty scanner. Personally I would just clean it, but there may be a time
where this procedure becomes useful (When the scanner starts to fail) so I am including it here.
Load a sheet of CLEAN bright white paper into the scanner
Press the SETUP key on the front panel.
Press the Right or Left ARROWS until "MAINTENANCE" appears.
Press the START/ENTER key.
Press the Right or Left ARROWS until "ADJUST SHADING" appears.
Press the START/ENTER key.
DOC-0333
Figure 30
Page 9
(Continued)
www.summitlaser.com