Ats0 Set Number Of Rings Before Automatically Answering Call - Quectel UG Series Command Manual

NOTE
TA returns to data mode from command mode CONNECT <text>,<text> only if ATX parameter is set as
value>0.

7.8. ATS0 Set Number of Rings before Automatically Answering Call

ATS0 controls automatic answering mode for the incoming calls.
ATS0 Set Number of Rings before Automatically Answering Call
Read Command
ATS0?
Write Command
ATS0=<n>
Maximum Response Time
Reference
V.25ter
Parameter
<n> 0
1-255
NOTE
If <n> is set too high, the calling party may hang up before the call is answered automatically.
Example
ATS0=3
OK
RING
RING
WCDMA_UGxx_AT_Commands_Manual
Response
<n>
OK
Response
This parameter setting determines the number of rings before
auto-answer.
OK
300ms
Automatic answering is disabled
Enable automatic answering on the ring number specified
//Set three rings before automatically answering a call
//Call coming
UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
Confidential / Released 93 / 247