Locating A Disc By Name; List-Up - Sony CDX-C6600 Operating Instructions Manual

Displaying the disc memo
Press (DSPL) during CD playback.
Each time you press (DSPL) during CD
playback, the item changes as follows:
Track number/
Elapsed playback time
Disc memo name
Erasing the disc memo
1
Select the CD unit (page 14).
2
Press (LIST) for two seconds.
3
Press (DSPL) for two seconds.
4
Rotate the dial to select the name you
want to erase.
5
Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 4 and 5 if you want to erase
other names.
6
Press (LIST) for two seconds.
The unit returns to the normal CD playback
mode.
16
$
$
$
Clock

Locating a disc by name

— List-up (For a CD unit with custom file
function or an MD unit)
You can use this function with discs that have
been assigned a custom name. For more
information on disc names, refer to "Labelling
a CD" (page 15).
1
Press (LIST) momentarily.
The name assigned to the current disc
appears in the display.
2
Press (LIST) repeatedly until you find the
desired disc.
3
Press (5) (ENTER) to play the disc.
Notes
• After a disc name has been displayed for five
seconds, the display returns to normal playback
mode. To turn off the display, press (DSPL).
• The track names are not displayed during MD
playback.
• If there are no discs in the magazine, "NO DISC"
appears in the display.
• If a disc has not been assigned a custom file,
"********" appears in the display.
• If the disc information has not been read by the
unit, "NOT READ" appears in the display. To load
a disc, first press the number button, then choose
the disc that has not been loaded.
• There are also some letters which cannot be
displayed (during MD playback).