Dell EqualLogic PS4210 Installation And Setup Manual page 16

PS4210 Installation Guide
Installing the Bezel
The steps for installing the bezel are the same for all a rray models:
1. Hook the right end of the bezel onto the right side of the chassis.
2. Swing the left end of the bezel toward the left side of the chassis.
3. Press the bezel into place until the release latch closes.
4. Using the key provided, lock the bezel and store the key in a safe place as shown in Figure
5.
8
Figure 5: Installing the Bezel
2 Rack Mounting the Array