Compact Disc Player CDP-NW10 DVD Player DVP-NW50 User’s Manual 2005 Sony Corporation 2-584-978-11(1)
Page 2
Welcome! Thank you for purchasing the Sony Custom Integrated AV System. Before operating the unit, please read this manual thoroughly and retain it for future reference.
ABLE OF ONTENTS About This Manual 5 Notes About the Discs 5 Features 6 Quick Guide to Disc Type 8 Chapter 1 Getting Started Setting up the System 10 Connecting a TV (DVP-NW50 only) 10 Connecting audio Equipment 10 Selecting a method for using the remote 11 Setting up the Units 11 Setting an IP Address 11 Naming the Unit 12...
Page 4
Setting a speaker level 45 Adjusting the speaker volume – TEST TONE 46 Setting the dynamic range compressor 46 Operating a Sony TV with the Remote 47 Controlling your TV with the remote 47 Chapter 9 Other Information Precautions 48...
About This Manual • Some operations and displays may differ slightly, depending on the model you use. • “DVD” may be used as a general term for DVD VIDEOs, DVD+RWs/DVD+Rs and DVD-RWs/ DVD-Rs. • The meaning of the icons used in this manual is described below: Icon Meaning...
Features The CDP-NW10/DVP-NW50 (referred to as the Unit in this manual) is a home audio component system based on network connections. A Unit is installed into the wall of a room and connected to other Units using an Ethernet connection (100Base-TX.) The system consists of: –...
Page 7
CDP-NW10/DVP-NW50 system network The diagram below illustrates an entire system network made up of multiple Units. The configuration shown below is for illustrative purposes only. It may differ from an actual system network. Contact your nearest installer for details on making the required connections for the system network. KITCHEN CDP-NW10 INTERNET...
Quick Guide to Disc Type Discs that can be played back on the Unit differ, depending on the model you are using. The kinds of disc that you can use on the Unit are as follows. CDP-NW10 Format of discs Music CD CD-R CD-RW...
Page 9
Example of discs that the Unit cannot play The Unit cannot play the following discs: – A disc that has a non-standard shape (e.g., card, heart) – A disc with paper or stickers on it – A disc that has the adhesive of cellophane tape or a sticker still left on it.
Chapter 1 Getting Started This chapter provides you with information how to connect and setup the Unit. Setting up the System Your system has already been installed by an installer. If you want to change the configuration, the TV or the audio equipment, check the location of the VIDEO out jack, the LINE IN jack, and the IR IN/OUT jack.
Selecting a method for using the remote Connections between the Unit and each device are made via cables or cords coming through the wall. You can operate a component using the remote if the IR IN/OUT terminal of the Unit and the component are connected.
Setting up the Units (continued) Press “AUTO” or “MANUAL” SELECT. If you select “AUTO,” setting an IP address is completed. If you select “MANUAL,” go to the step 6. Press the A SELECT to set an IP address. “ i ” appears, and the first three numbers can be entered.
Setting the time You must set the time to make functions available, such as an alarm or a sleep timer. Display the Home Menu as shown below beforehand (see page 18). Press the “V” SELECT on the HOME Menu, then press the “CLOCK”...
Chapter 2 Parts and Controls Parts and Controls This chapter provides you with information on the parts and controls of each component, and information on menu operation.
Key operation on the Unit 1 REMOTE SENSOR 2 SPEAKER (for INTERCOM/MONITOR) (page 38, 39) Receives the sound while INTERCOM or MONITOR is set to ON. 3 X/1 (POWER) (page 20, 22, 23) Press to turn the power on/off. 4 SELECT (page 18) Press to select an item on the front panel display, such as menu items, settings, tracks, etc.
Parts and Controls (continued) Key operation on the remote RM SETUP TV/VIDEO ENTER CLEAR SELECT MODE BACK HOME DOWN MUTING TOP MENU MENU MASTER VOL ENTER RETURN DISPLAY TV VOL TV CH AUDIO ANGLE SUBTITLE DVD SETUP...
Page 17
DISPLAY* (page 26) Press to display a search menu. qh TV VOL +/– (page 47) Press to adjust the Sony TV volume. TV VOL + button has a tactile dot.** qj TV CH +/– (page 47) Press to change the Sony TV channel.
Parts and Controls (continued) Preparing the remote Insert two R06 (size-AA) batteries into the battery compartment with the + and – correctly oriented to the markings. When using the remote, point it at the IR sensor on the Unit. Notes •...
Menu tree You can set the following items from Home Menu. When you press MODE on each of the displays, the Mode Menus shown on the right side appear on the front panel display. HOME CD/DVD/VCD/MP3 (pages 20 to 30) Track list (CD only) TUNER (pages 31 to 33) Preset station list...
Chapter 3 Playing Discs (CDP-NW10 only) This chapter describes how to play a CD disc or how to play audio in various modes using the CDP-NW10. Playing a CD Disc Press X/1 (POWER). The Unit turns on. Press OPEN/CLOSE to open the door, then place a disc on the spindle firmly.
Various play mode functions (Shuffle play, Repeat play) Shuffle play You can play back tracks in random order. 1 Press MODE on the CD display. The Mode Menu appears. 2 Press the “SHUF” SELECT. “SHUF” is highlighted. 3 Press N to start Shuffle play. Shuffle Play starts.
Chapter 4 Playing Discs (DVP-NW50 only) This chapter describes how to play CD or DVD discs, and the settings and functions related to a DVD player. Playing a CD Disc Press X/1 (POWER). The Unit turns on. Press OPEN/CLOSE to open the door, then place a disc on the spindle firmly.
Various play mode functions (Shuffle play, Repeat play) Shuffle play You can play back tracks in random order. 1 Press MODE on the CD display. The Mode Menu appears. 2 Press the “SHUF” SELECT. “SHUF” is highlighted. 3 Press N to start Shuffle play. Shuffle Play starts.
Playing a DVD/VCD/MP3 Disc (continued) Repeat play 1 Press MODE on the DVD display. The following display appears. 2 Press the A SELECT repeatedly. When playing a DVD If you select Plays “REP-OFF” All tracks on a disc once. “REP-CHAP” A single chapter repeatedly.
Playing an MP3 audio track You can play MP3 audio tracks on CD-ROMs, CD-Rs, or CD-RWs. However, the discs must be recorded according to ISO9660 level 1, or Joliet format for the Unit to recognize the tracks. Insert a data disc recorded in MP3 format into the Unit. A folder list is displayed on the TV screen.
Searching for a scene (continued) Press DISPLAY on the remote. The following display appears. The number in parentheses indicates the total number of titles, tracks, etc., of the disc. Press G /g/F/f repeatedly to select a search method on the remote. When playing a DVD VIDEO/DVD-RW TITLE CHAPTER...
Parental control (limited playback) The following operations are set up using the remote while looking at a TV screen. The “PARENTAL CONTROL” function allows you to set a playback limitation level. Playback of some DVD VIDEOs can be limited according to a predetermined level, such as the age of the users.
Using Various Additional Functions (continued) 5 To confirm your password, re-enter the new 4-digit password using the numeric buttons on the remote. If you make a mistake entering your password, re-enter your correct password. 6 Press ENTER on the remote. If you forget your password, or the first time you change the password, enter the 4-digit number “9703”...
TV Display Selects the aspect ratio of the connected TV screen (4:3 standard or wide). Depending on the disc, “Normal/LB” may be selected automatically instead of “Normal/PS” or vice versa. The default setting is underlined. Normal/PS (4:3 PAN SCAN) Select this when you connect a 4:3 screen TV.
Page 30
Using the Setup Display (DVD Settings) (continued) Default (this page) All the settings explained on pages from 28 to 29 return to the default settings. If you select “OTHERS” in “Audio,” “Subtitle,” or “Disc Menu,” select and enter a language code from the language code list (page 55) using the numeric buttons.
Chapter 5 Enjoying Radio and Other Component This chapter describes how to receive FM/AM stations, and listen to sound from a component connected to LINE IN using the Unit. Listening to the Radio You can tune in stations on the Unit by preset tuning or manual, automatic, or direct tuning.
Page 32
Listening to the Radio (continued) Press MODE to switch the band to AM (or FM). The Tuner mode Menu appears. Press the “AM” (or “FM”) SELECT, then press BACK. The display returns to the current frequency. Press any SELECT. The display changes to the current frequency. Press DOWN/UP on the remote to adjust the frequency.
Presetting Radio Stations After you have tuned in stations using direct tuning or Automatic tuning, you can preset them to the Unit. Up to 20 FM or AM stations can be preset. Press “TUNER” SELECT on the Home Menu. The display changes to the Tuner display, then the Preset station list appears.
Listening to Sound from a Component Connected to LINE IN You can listen to music from an external source if the Unit is connected to another playback component, such as a CD changer, etc. Press the “LINE IN” SELECT on the Home Menu. The LINE IN display appears.
Chapter 6 Using the System Network This chapter describes how to use network functions among Units and computers, etc. You can enjoy music, and use the intercom and the monitor function connecting each of the Units via an Ethernet cable. Playing Music on Other Units You can play back and share the music content in all Units...
Playing Music on Other Units (continued) Playing back music from “MY MUSIC” When you select “MY MUSIC,” audio CDs in other Units and MP3-format music files from your computers are played back. When the Unit has been connected to the Internet via a computer, CD information, such as artist name, album and track titles, or genre, are downloaded from the Gracenote CDDB...
Enjoying Music in All Rooms Simultaneously (Party mode) Using the Party mode function, you can share the music content among multiple Units simultaneously. You can also exclude a selected room from the Party mode (Party Privacy). Source and play modes available in the Party mode are the following: •...
Talking with Persons in Other Rooms (INTERCOM) You can talk with person in any room using the Intercom function. While INTERCOM is set to ON, the internal speaker is activated and speakers connected to the Unit are muted. The streaming on the network stops until the intercom connection is terminated on both of the sending and receiving rooms.
Monitoring Other Rooms (MONITOR) You can monitor other rooms via the Unit. While MONITOR is set to ON, the internal speaker is activated and speakers connected to the Unit are muted. The streaming on the network stops until the monitor connection is terminated on the both of monitoring and monitored Units.
Chapter 7 Setting the Timer This chapter provides you with information on setup of the timer. Setting the Alarm You can set the Unit to turn on automatically at a specified time. Press the “V” SELECT on the Home Menu, then press the “CLOCK”...
Setting the Sleep Timer You can set the Unit to turn off automatically at a specified time. Press the “V” SELECT on the Home Menu, then press the “CLOCK” SELECT. The Clock Menu appears. Press the “SLEEP” SELECT. The Sleep timer Menu appears. Press the “SELECT”...
Chapter 8 Other Functions This chapter describes the setup of the front panel display, sound field, and speakers. Using the Setup Display You can set up the sound on the Unit. Selecting the surround mode (DVP-NW50 only) Press MODE on the DVD display. The following display appears.
Adjusting the contrast of the front panel display (DIMMER) Press the “V” SELECT on the Home Menu, then press the “SETUP” SELECT. The Setup Menu appears. Press the “DIMMER” SELECT to activate DIMMER. “ON” and “OFF” are toggled as you press the “DIMMER”...
Settings for Speakers (DVP-NW50 only) To obtain the best possible surround sound, set the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the volume of the speakers to the same level. Selecting a speaker size Set the speaker size to match the size of the speakers you are using.
Setting the speaker distance You must set the distance from your listening position to the speakers. The available distance for a center and a surround speaker depends on that of the front speaker. The next list shows the selectable distance value of each speaker.
Settings for Speakers (DVP-NW50 only) (continued) Adjusting the speaker volume – TEST TONE The speakers will emit a test tone. Use the remote while seated in your listening position to adjust the volume of each speaker. The default setting is underlined. Test Tone Function The test tone is not emitted from the...
Operating a Sony TV with the Remote Controlling your TV with the remote You can operate a Sony TV using the remote without presetting remote codes. RM SETUP TV/VIDEO TV/VIDEO ENTER CLEAR SELECT MODE BACK HOME DOWN MUTING TOP MENU...
Chapter 9 Other Information This chapter provides you with additional information that will help you understand and maintain your system. Precautions On safety • CAUTION – The use of optional instruments with this product will increase eye hazard. • To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.
Plasma display panel televisions and projection televisions are susceptible to this. If you have any questions or problems concerning your Unit, please consult your nearest Sony dealer. Troubleshooting If you experience any of the following difficulties while using the Unit, use this troubleshooting guide to help you to remedy the problem.
Page 50
Troubleshooting (continued) Sound There is no sound. , The speaker cord is not connected securely. , Check the speaker settings (Installer’s manual). , The connecting cord is damaged. Replace it with a new one. , Press MUTING on the remote if “MUTING” is displayed on the front panel display.
Page 51
Cannot monitor other rooms. , Monitor Privacy is set to on. Set it to off. , The volume level is low. Press +VOLUME to adjust the volume. , Other Units have been using Intercom. Wait for a while until Monitor is available. Cannot get track title while listening to music from NETWORK or MY MUSIC.
Page 52
, The DVD prohibits changing angles. A disc cannot be ejected and “LOCKED” appears on the front panel display. , Contact your Sony dealer or local authorized Sony service facility. “PROTECT” appears on the front panel display. , The speaker protection circuit is functioning.
Error Messages If any of the messages below appear on the front panel display of the Unit, check the following table to solve the problem. If any problem persists, consult your nearest Sony dealer. Category Message PROTECTOR CD/DVD NO DISC...
Specifications CDP-NW10/DVP-NW50 Laser Semiconductor laser (CD: = 780nm) (DVD: = 650nm) Emission duration: continuous Signal format system NTSC Audio section Frequency response 20 Hz to 20 kHz ( 1 dB) Signal-to-noise ratio 95 dB Rated output power 1kHz into 8ohms THD: 3% CDP-NW10: 30 W + 30 W DVP-NW50: 50 W + 50 W Input sensivity (LINE IN)
Index Numerics 16:9 Wide 2CH STEREO A.F.D ALARM ANGLE 17, 26 Angle Mark 29 AUDIO 17, 26 Audio BACK 15, 17 BALANCE 43, 45 Batteries Cable connect Call sound Captions 5, 20, 22 CHAPTER CLEAR Component 34 DATA CD Default DIAGNOSIS 12 DIMMER Disc Menu...
Page 57
TEST TONE 46 TIME OUT TITLE TOP MENU 17 TRACK Troubleshooting TUNER TV CH 17, 47 TV Type TV/VIDEO 17, 47 TV VOL 17, 47 TV ?/1 17, 47 Unit Name VIDEO CD 5, 24 VOL PRESET VOLUME 15, 17, 38, 39 Symbols 15, 17 ./>...