Related Manuals for Packard Bell EasyNote MX Series
Summary of Contents for Packard Bell EasyNote MX Series
- Page 1 Your digital playground Packard Bell Easy Repair EasyNote MX Series Hard Disk Drive Repair Instructions www.packardbell.com...
-
Page 2: Tools Needed
Anti-static wrist strap; • Something to hold the small screws (trays, jars, or cups). Label each cup with the disassembly step number. This can reduce questions about where each screw came from during re-assembly. 2 - Packard Bell Easy Repair... - Page 3 6. When you are grounded through the wrist strap, locate the metal screws to the sides of the VGA con- nector at the back of the notebook. Touch them fi rmly for a few seconds to ground the notebook. You are now safe to proceed with the Easy Repair. Packard Bell Easy Repair - 3...
- Page 4 3. Gently pull the plastic tab on the hard disk drive 4. Now you can lift the drive out of the compart- towards you to disconnect the drive. ment. Fig. 5 Disconnect the hard disk drive. Fig. 6 Remove the hard disk drive. 4 - Packard Bell Easy Repair...
- Page 5 (Master, Slave or Cable Select) as on the re- the four screws. placed drive. Fig. 9 Check the hard disk drive jumper setting. Fig. 10 Slide the new hard disk drive into the bracket. Packard Bell Easy Repair - 5...
- Page 6 Fig. 11 Connect the hard disk drive. Fig. 12 Close the hard disk drive cover. 3. Re-insert and tighten the two screws to secure the cover. Fig. 13 Re-insert the hard disk drive cover screws. 6 - Packard Bell Easy Repair...
- Page 7 Packard Bell notebook. To do this, follow the steps below: 1. Insert the Packard Bell Master CD 1 / DVD in the CD / DVD drive and restart your notebook. 2. The disc will load and you will see the following...
- Page 8 Packard Bell B.V. P.O. Box 337 7420220001 6600 AH Wijchen 7420220001 The Netherlands Document Version: 0.4 Your digital playground...
Need help?
Do you have a question about the EasyNote MX Series and is the answer not in the manual?
Questions and answers