Fading In Or Out - Sony CDP-C360Z Operating Instructions Manual

Recording From CDs
7
When you record on side B, reverse the tape and
press · or P on the player to resume playing.
To cancel Time Edit
Press CONTINUE.
You can program the tracks you want in advance
Select the tracks before doing the above procedure. The
player creates a program from the remaining tracks.
You can freely specify the tape length
Set the tape length using the ≠ AMS ± control.
Example: When the tape length of one side is 30 minutes
and 15 seconds
1 To set the minutes, turn ≠ AMS ±
until "30" appears in the display, then push
≠ AMS ±.
2 To set the seconds, turn ≠ AMS ± until
"15" appears in the display, then push
≠ AMS ±.
You can check and change the program
See page 17.
20

Fading In or Out

You can manually fade the sound in or out to prevent
tracks from starting or ending abruptly.
EDIT/TIME FADE* 0/)
FADER
To
Press FADER
Start play fading in
During pause.
the display and the Q indication
flashes. The play fades in.
End play fading out
When you want to start fading out.
FADE
the q indication flashes. The play
fades out and the player pauses.
Note
Fading lasts for about 5 seconds. However, when you press
the FADER button during Music Scan (see page 12), the play
fades out for about 2 seconds.
Fading out at the specified time
(Time Fade) (CDP-CE415 only)
You can have the player fade out automatically by
specifying the playing time. Once you set the Time
Fade, it works twice, that is, the play fades out at the
end of both sides of a tape.
1
Press EDIT/TIME FADE repeatedly before you
TIME
start playing until
FADE
indication appear in the display.
2 Press 0 or ) to specify the playing time.
Each time you press these buttons, the display
changes as shown below, with the playing time of
one side following each indication.
n C-46 ˜ C-54 ˜ C-60 ˜ C-74 ˜ C-90 ˜ - -. - - N
(23.00) (27.00) (30.00)
· P
*CDP-CE415 only
lights up in
FADE
lights up in the display and
A
and "A" in the
(37.00) (45.00)