Download Print this page

Wuhan Guide Sensmart Tech Co.,Ltd. IR510 Nano Series Quick Start Manual

Advertisement

Quick Links

A video output port is provided next to the USB interface at
the bottom of the thermal imager, and will output the image
of the thermal imager to an external monitor for display
through the supplied the video cable.
Simultaneously press "Image Mode Button + Zoom
Button" to turn on the video output; in the video output
status, there is a video output icon.
Cursor switch
Simultaneously press the "Image Mode Button + Brightness
Button" to switch on/off the cursor.
Thermal imagers shall not be pointed to high-
strength energy sources (including the Sun, laser
transmitting equipments and their reflection
sources), which otherwise will have a negative
influence on its accuracy and damage or
permanently damage infrared detector of it.
When the thermal imager will be not used for a
long time, charge the thermal imager at least 2.5
hours every two months during the storage, and
store the thermal imager in a dry and well-
ventilated environment.
Human eyes shall not be irradiated by the laser
designator of the thermal imager.
Do not charge the battery in an environment over
40℃.
Our company shall not bear any legal responsibility for any
mistake and accident caused by own reasons or reasons of
any third party in the course of using this product by the user
or property loss and personal injury caused by misjudgment
against images.
We prepare this guide with the purpose of facilitating users to
use and understand our products. We will try our best to
ensure the accuracy of contents of this guide, but we still
cannot ensure the completeness of contents of it. Since we
have been continuously updating and upgrading our products,
we reserve the right to modify this guide at any time without
prior notice.
http://www.guideir.com
SERIES
Statement:
This guide is applicable to the IR510 Nano series products, including
the following four models. The differences are as follows,please
carefully read this guide before using the thermal imager.
Lens
Model
25mm (supports
19mm
expansion lens)
×
IR510 N1
×
IR510 N1 WIFI
×
IR510 N2
×
IR510 N2 WIFI
WUHAN GUIDE SENSMART TECH CO.,LTD.
SERIES
Function
Image
Freeze
Wifi(APP)
enhance
×
×
×
×
×
×

Advertisement

loading
Need help?

Need help?

Do you have a question about the IR510 Nano Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Wuhan Guide Sensmart Tech Co.,Ltd. IR510 Nano Series

  • Page 1 Statement: mistake and accident caused by own reasons or reasons of This guide is applicable to the IR510 Nano series products, including any third party in the course of using this product by the user the following four models. The differences are as follows,please or property loss and personal injury caused by misjudgment carefully read this guide before using the thermal imager.
  • Page 2 SERIES SERIES The thermal imager has three power states: Power On, Click this button to switch the white hot mode, black hot mode Standby and Power Off; and red hot mode; Power On: Press and hold the power button for 2 seconds, so that the thermal imager is turned on, and the startup White Hot Mode The object with higher temperature...
  • Page 3 FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

This manual is also suitable for:

Ir510 n1Ir510 n1 wifiIr510 n2Ir510 n2 wifi