Related Manuals for VADDIO RoboSHOT HD-SDI Series
Summary of Contents for VADDIO RoboSHOT HD-SDI Series
- Page 1 Complete Manual for RoboSHOT HD-SDI and RoboSHOT SDI Professional A/V Presentation Cameras Including RoboSHOT 12 HD-SDI, RoboSHOT 30 HD-SDI, RoboSHOT 12E SDI, and RoboSHOT 30E SDI Document 411-0027-30 Rev B April 2019...
-
Page 2: Table Of Contents
Contents Overview What's in this Guide Camera Features Unpacking the Camera A Quick Look at the Camera Front of the Camera Back of the Camera – RoboSHOT 12E SDI and RoboSHOT 30E SDI Back of the Camera – RoboSHOT 12 HD-SDI and RoboSHOT 30 HD-SDI Installing the Camera Don’t Void Your Warranty! Before You Start... - Page 3 Adding Room Information to the Camera's Web Interface Saving (Exporting) or Restoring (Importing) a Camera Configuration Installing a Camera Firmware Update Rebooting the Camera Contacting Vaddio Technical Support Accessing the Diagnostic Logs Configuring Camera Behavior Setting the Custom Home Position and Other Preset Shots...
- Page 4 Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Operating the Camera from the Web Interface Switching the Camera Off or On (Standby) Stop or Resume Sending Video (Mute) Moving the Camera Zooming In or Out Moving the Camera to a Preset Position Adjusting the Color and Lighting Telnet Command Reference camera home...
- Page 5 Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Check the Status Light First Check the Cables Next Power/Responsiveness Issues Video and Streaming Issues Camera Control and Other Issues Restoring Factory Settings from the Web Interface Restoring Factory Default Settings Via Hardware Operation, Storage, and Care Compliance and Conformity Statements FCC Part 15 Compliance...
-
Page 6: Overview
For your convenience, the information you need to install this product is also available in the smaller, stand- alone Installation Guide for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras, which covers unpacking, physical features, switch settings, installation, and initial power-up. Download manuals, dimensional drawings, and other information from www.vaddio.com/support. -
Page 7: Camera Features
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Camera Features Enterprise-class performance and flexibility, with simultaneous 3G-SDI, HDMI, and H.264 IP streaming (RTSP or RTMP) View the RTSP stream from the camera using any standards-based media viewer Full HD (native 1080p/60) resolution ®... -
Page 8: Unpacking The Camera
PoE+ mid-span power injector with AC cord set(s) Quick-Start Guide Note If you need an EZCamera RS-232 Control Adapter for use with this camera, please contact Vaddio Technical Support to obtain one. RoboSHOT 12 HD-SDI, North America – 999-9930-000 (silver/black) RoboSHOT 12 HD-SDI, Europe/UK –... - Page 9 PoE+ mid-span power injector with AC cord set(s) Quick-Start Guide Note If you need an EZCamera RS-232 Control Adapter for use with this camera, please contact Vaddio Technical Support to obtain one. Download manuals, dimensional drawings, and other information from www.vaddio.com/support.
-
Page 10: A Quick Look At The Camera
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras A Quick Look at the Camera The cameras in the RoboSHOT line are similar in appearance. RoboSHOT 12 HD-SDI is silver, with a black base and stepped lens bezel RoboSHOT 30 HD-SDI is available in black or white, and has a fluted lens bezel RoboSHOT 12E SDI and RoboSHOT 30E SDI are available in black or white, and have smooth lens bezels The image below shows a RoboSHOT 30 HD-SDI camera. -
Page 11: Back Of The Camera - Roboshot 12E Sdi And Roboshot 30E Sdi
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Back of the Camera – RoboSHOT 12E SDI and RoboSHOT 30E SDI Rear panel connections are identical for the older RoboSHOT 12E SDI and RoboSHOT 30E SDI cameras. From left to right: Network PoE+: RJ-45 connector. -
Page 12: Back Of The Camera - Roboshot 12 Hd-Sdi And Roboshot 30 Hd-Sdi
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Back of the Camera – RoboSHOT 12 HD-SDI and RoboSHOT 30 HD-SDI Rear panel connections are identical for the older RoboSHOT 12 HD-SDI and RoboSHOT 30 HD-SDI cameras. From left to right: 12 VDC 3.0 A: EIAJ-04 jack for local power. -
Page 13: Installing The Camera
Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of these things happen, return it to Vaddio for safety and functional testing. Caution If using a DC power supply with this product, use the power supply included with it or recommended for use with it. -
Page 14: Installing The Wall Mount
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Prepare for a successful installation: Be sure you can identify all cables correctly. Check Cat-5 cables for continuity. Ensure that the video resolution rotary switch and the DIP switches (if any) are set appropriately. Talk to the network administrator. -
Page 15: Video Resolution Setting
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Video Resolution Setting All non-architectural RoboSHOT cameras use a rotary switch to set output resolution. Streaming resolution is set separately in the web interface. Set the desired video output resolution with the rotary switch before installing the camera. Note that the video resolutions are mapped differently on the rotary switch for the newer Elite-series cameras. -
Page 16: Camera Behavior Settings - Roboshot 12 Hd-Sdi And Roboshot 30 Hd-Sdi
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Camera Behavior Settings – RoboSHOT 12 HD-SDI and RoboSHOT 30 HD- Older RoboSHOT cameras use DIP switches to set camera behaviors; the RoboSHOT Elite series cameras set all camera behaviors in the web interface. A label on the bottom of the camera provides a quick reference for setting the switches. -
Page 17: Rs-232 Serial Communication Settings
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras RS-232 Serial Communication Settings The RS-232 serial port (color-coded blue) provides a means of controlling the camera from a third-party device. Be sure the camera is set to the same baud rate as the external control device. Specification Value Communication Speed... -
Page 18: Cabling Notes
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Cabling Notes Caution When making cables, do not use pass-through RJ-45 connectors. If they are crimped incorrectly, they can damage the connectors on the product, cause intermittent connections, and degrade signal quality. Physical damage to the connectors may void your warranty. -
Page 19: Basic Connections - Roboshot 12E Sdi And Roboshot 30E Sdi
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Basic Connections – RoboSHOT 12E SDI and RoboSHOT 30E SDI This diagram shows a basic installation for the RoboSHOT 12E SDI and RoboSHOT 30E SDI models. The connections are the same as for the RoboSHOT HD-SDI with PoE+ power. Basic Connections –... -
Page 20: Options For Power And Other Connections - Roboshot Hd-Sdi Cameras
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras This example uses a PoE+ mid-span power injector, allowing the camera to be placed at a distance from the nearest power outlet. Options for Power and Other Connections – RoboSHOT HD-SDI Cameras Use the provided 12 VDC power supply –... -
Page 21: Installing The Camera
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Installing the Camera Be sure you have already set the camera's switches. Caution Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in equipment damage and will void the warranty. -
Page 22: Powering Up The Camera
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Powering Up the Camera Connect camera power. The camera will run a self-test routine and move to its home position. This will take a few seconds. When the camera is initialized and ready, video is available and the status light is blue. At this point, the camera is ready to accept control information. -
Page 23: Using The Ir Remote
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Using the IR Remote The IR remote provides basic camera control. IR Remote Cheat Sheet What do you need to do? Button(s) Power on or standby Power (green button at top right) Select the camera to control (if Camera Select buttons 1 through 3 this remote controls more than... -
Page 24: Ir Remote Details
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras IR Remote Details The Vaddio remote provides the following functions: Power – Switch the selected camera on or off. Power indicator – Lights momentarily when you press a button. Back Light – Use or turn off Back Light Compensation. -
Page 25: Web Interface
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Web Interface The camera's web interface allows control via a network connection, using a browser. Password-protected pages provide administrative access to tasks such as setting passwords, changing the IP address, viewing diagnostics, and installing firmware updates. -
Page 26: User Access
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras User Access By default, the web interface opens to the Controls page, but the camera can be configured to require a user login. The default user password is password, but this can be changed. Check with the system administrator if the camera's web interface requires you to log in. -
Page 27: Administrative Access
Room Labels page – Information to display on the web interface screens, including the conference room name and phone number and the in-house number for AV assistance. Help page – Tech support contact information and a link to the product information library on the Vaddio website. -
Page 28: Web Interface Cheat Sheet
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Web Interface Cheat Sheet Where to find the camera controls you need right now. What controls do you need? Go to this screen Camera operation (any page) Stop sending video (video mute) Enter or exit standby mode Camera operation Controls (user or guest access) - Page 29 DHCP or static addressing Static: IP address, subnet mask, gateway Time zone and NTP server (source for system time/date) Networking Information about the camera location Room Labels Help desk phone number for end users Vaddio Technical Support contact information Help Diagnostic logs Diagnostics...
-
Page 30: System Administration
Note Vaddio's RoboSHOT series cameras all have very similar web interfaces. Some of the screen shots in this manual may be from other models in the RoboSHOT series. For Non-DHCP Environments: Configuring the Device with a Static IP... - Page 31 Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras To access the camera's Networking page during installation (skip this procedure if the camera has already been in service on this network): 1. Connect the camera according to the connection diagram, but do not connect the camera to the network.
-
Page 32: Changing The Camera's Hostname
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras To configure the camera with a static IP address: 1. Work with your IT department to determine the correct IP address, subnet mask, and gateway to assign. 2. On the Networking page, set IP Address to Static. 3. -
Page 33: Optional For Dhcp Environments: Changing From A Dhcp Address To A Static Ip Address
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Optional For DHCP Environments: Changing from a DHCP Address to a Static IP Address ETWORKING PAGE In a network that assigns IP addresses automatically, the camera's IP address may change from time to time. -
Page 34: Specifying Time Zone And Ntp Server
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Specifying Time Zone and NTP Server ETWORKING PAGE Using automatic NTP updating ensures that the timestamps in the camera's diagnostic log are accurate. Specifying your time zone may make it easier to match logged events with other actions and external events. -
Page 35: Managing Access And Passwords
Consult your network security specialist before changing any of these settings. Note For best security, Vaddio strongly recommends changing the user and admin passwords from the default. Using the default passwords leaves the product vulnerable to tampering. Disabling Telnet Access... -
Page 36: Enabling Or Requiring Https
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Enabling or Requiring HTTPS ECURITY PAGE By default, the web interface uses the HTTP protocol. You can configure the camera's web interface to require a secure HTTPS connection instead. Caution Consult your network security professional to manage the camera's SSL certificate. -
Page 37: Adding Room Information To The Camera's Web Interface
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Adding Room Information to the Camera's Web Interface ABELS PAGE The information you enter on this page is displayed on every page of the web interface. -
Page 38: Saving (Exporting) Or Restoring (Importing) A Camera Configuration
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Saving (Exporting) or Restoring (Importing) a Camera Configuration YSTEM PAGE IRMWARE TAB You can import a configuration to several cameras if you need to configure them the same way. Cameras must be of the same model, and must have a compatible firmware version installed. Configuration data does not include passwords or unique information such as hostname. -
Page 39: Installing A Camera Firmware Update
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Installing a Camera Firmware Update YSTEM PAGE IRMWARE TAB Caution The camera must remain connected to power and to the network during the update. Interrupting the update could make the camera unusable. 1. -
Page 40: Rebooting The Camera
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Rebooting the Camera YSTEM PAGE IRMWARE TAB This can help if the camera stops responding as you expect. In the System Utilities section, select Reboot. -
Page 41: Contacting Vaddio Technical Support
You’ll find information for contacting Vaddio Technical Support on the Help page. The model identifier and the link for support information vary depending on the camera model. Accessing the Diagnostic Logs... -
Page 42: Configuring Camera Behavior
Note Vaddio's RoboSHOT series cameras all have very similar web interfaces. Some of the screen shots in this manual may be from other models in the RoboSHOT series. Setting the Custom Home Position and Other Preset Shots AMERA PAGE The camera's default home position is 0°... -
Page 43: Renaming Presets And Custom Ccu Scenes
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras To store a preset or custom home position: 1. Set up the shot. 2. Select Store to open the Store Preset dialog. 3. Select the preset to define. 4. Select Store with Current Color Settings to save the current CCU settings along with the camera position. -
Page 44: Initial Lighting And Color Settings
AMERA PAGE No two rooms are exactly alike – but a lot of rooms are a lot alike. The technical folks at Vaddio (Scott, to be specific) have already set up presets for common lighting scenarios (CCU scenes) – Incandescent Hi, Incandescent Lo, Fluorescent Hi, Fluorescent Lo, and Outdoor. -
Page 45: Lighting Adjustments
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Lighting Adjustments AMERA PAGE The camera provides settings to compensate for common lighting problems. Auto Iris allows the camera to compensate automatically for the light level. Backlight Compensation reduces contrast to adjust for bright light behind the main subject of the shot. -
Page 46: Lighting And Image Quality Cheat Sheet
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Lighting and Image Quality Cheat Sheet Here are some tips for using the CCU settings for lighting and image quality. For more detailed information on each setting, see Lighting Adjustments Fine-Tuning Image Quality and Color. -
Page 47: Color Adjustment Cheat Sheet
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Color Adjustment Cheat Sheet Here are some tips for using the color-related CCU settings. For more detailed information on each setting, Fine-Tuning Image Quality and Color. What do you need to correct? Make this adjustment: Colors look less vivid than they should Increase Chroma... -
Page 48: Adjusting The Focus
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Adjusting the Focus AMERA PAGE Open the Focus control to select Auto-focus, or set manual focus with the + (near) and – (far) buttons. I know you already understand this, but I’m going to say it anyway: The + and – buttons don’t work when Auto Focus is selected. -
Page 49: Configuring Ip Streaming
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Configuring IP Streaming TREAMING PAGE IP streaming is enabled by default. Just as your camera outputs video unless you mute it, the camera also streams except when you disable the stream. About IP Streaming Two IP streaming protocols are available: RTSP and RTMP. -
Page 50: Stopping The Ip Stream
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Stopping the IP Stream TREAMING PAGE Just as the camera outputs video unless you mute it or put it in standby, the camera also streams except when you disable the stream. Options: To stop IP streaming entirely: Clear the Enable IP Streaming check box. -
Page 51: Setting Up Streaming In Easy Mode
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Setting up Streaming in Easy Mode TREAMING PAGE If you are not sure how to configure streaming settings, start with the Easy mode defaults. This configures most settings automatically. 1. Select Easy quality mode. 2. -
Page 52: Setting Up Streaming In Custom Mode
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Setting up Streaming in Custom Mode TREAMING PAGE 1. Select Custom quality mode. 2. Select the desired resolution. 3. Select the desired frame rate. 4. Select Constant or Variable bit rate. 5. -
Page 53: Rtsp Streaming Protocol And Url
RTSP is the default streaming protocol. When IP streaming is enabled, the RTSP stream is automatically available at the streaming URL shown. RTSP port: Vaddio strongly recommends using the default RTSP port number. Path: The portion of the streaming URL that appears after the IP address. You may wish to change this to help identify the stream source –... -
Page 54: Configuring Rtmp Streaming
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Configuring RTMP Streaming TREAMING PAGE To use RTMP streaming, you must have an account with a streaming service. To configure an RTMP streaming service: 1. Select RTMP streaming, and select Settings. 2. -
Page 55: Advanced: Changing Mtu
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras To select the enabled RTMP streaming service: Expand the list of available streaming services, and select the one to use. Note When RTMP streaming is selected and a service is configured, the camera streams to that service until you stop the stream. -
Page 56: Speed Adjustments
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Speed Adjustments AMERA PAGE The following speed adjustments are available: Manual pan, tilt, and zoom speeds – Used when you control camera movements with the IR Remote Commander or the arrow buttons in the web interface Global Preset Non-Tri-Sync Speeds –... -
Page 57: Setting The Speed Of Movements To Presets
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Setting the Speed of Movements to Presets AMERA PAGE To set speeds for movements to presets: 1. Store presets at several points in the room, at different zoom levels, saving them without selecting the Tri-Sync option. -
Page 58: Adjusting Tri-Synchronous Motion Speed
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Adjusting Tri-Synchronous Motion Speed AMERA PAGE The Tri-Synchronous Motion algorithm calculates the pan, tilt and zoom speeds needed for the camera to move from one preset to the next so that all three movements begin together and arrive at the same time. You may need to experiment to find the best Tri-Sync speed setting. -
Page 59: Setting The Direction For Camera Movements
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Setting the Direction for Camera Movements AMERA PAGE By default, the arrow buttons on the remote and in the web interface show the direction you would see the camera move if you were looking the same direction as the camera. If a person facing the camera is controlling it with the remote, using the right arrow pans the camera to the person's left. -
Page 60: Reading The Camera's Switches
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Reading the Camera's Switches , DIP S YSTEM PAGE WITCHES TAB Open the DIP Switches tab to see the camera's current switch settings and configure certain camera behaviors. Note: Sorry, you have to physically move the switch(es) on the back of the camera if you need to change them. This tab only controls the soft DIP switches. -
Page 61: Basic Camera Settings For Roboshot 12E Sdi And Roboshot 30E Sdi
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Basic Camera Settings for RoboSHOT 12E SDI and RoboSHOT 30E SDI , DIP S YSTEM PAGE WITCHES TAB Basic settings for the RoboSHOT E-series cameras are on the lower row of soft DIP switches. These correspond to the physical switches on the older RoboSHOT cameras. -
Page 62: Additional Camera Behavior Settings
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Additional Camera Behavior Settings , DIP S YSTEM PAGE WITCHES TAB Additional features are available on the upper row of soft DIP switches. These settings are the same for all cameras in the RoboSHOT HD-SDI family. -
Page 63: Operating The Camera From The Web Interface
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Operating the Camera from the Web Interface ONTROLS PAGE The Controls page does not require administrative access. If guest access is enabled, you do not need to log in to access this page. If guest access is disabled, you will need to log in as user. The Controls page provides most of the same controls as the IR Remote Commander. -
Page 64: Moving The Camera
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Moving the Camera Use the arrow buttons for camera pan and tilt. The center button moves the camera to the home position. Zooming In or Out Use the Zoom + button to zoom in and the Zoom - button to zoom out. Moving the Camera to a Preset Position Presets are camera shots that have been stored. -
Page 65: Telnet Command Reference
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Telnet Command Reference Vaddio's Telnet command protocol allows external devices to control the camera. Network connectivity and a Telnet client are required; Telnet port 23 is used. Telnet sessions require the administrator account login. ... -
Page 66: Camera Home
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras camera home Moves the camera to its home position. Synopsis camera home Example >camera home > camera pan Moves the camera horizontally. Synopsis camera pan { left [<speed>] | right [<speed>] | stop | get | set } Options Moves the camera left. -
Page 67: Camera Tilt
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras camera tilt Moves the camera vertically. Synopsis camera tilt{ up [<speed>] | down [<speed>] | stop | get | set} Options Moves the camera up. Moves the camera down. down speed <1 – 20> Optional: Specifies the tilt speed as an integer (1 to 20). -
Page 68: Camera Zoom
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras camera zoom Zooms the camera in toward the subject or out away from the subject. Synopsis camera zoom { in [<speed>] | out [<speed>] | stop | get | set} Options Moves the camera in. -
Page 69: Camera Focus
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras camera focus Changes the camera focus. Synopsis camera focus { near [<speed>] | far [<speed> | stop | mode {get | auto | manual}} Options near Brings the focus nearer to the camera. Can only be used when camera is in manual mode. -
Page 70: Camera Preset
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras camera preset Moves the camera to the specified preset, or stores the current camera position and optionally CCU information, either with or without specifying that Tri-Synchronous Motion is to be used when moving to this position. -
Page 71: Camera Ccu Get
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras camera ccu get Returns CCU (lighting and color) information. Synopsis camera ccu get <param> Options Returns all current CCU settings. auto_white_balance Returns the current state of the auto white balance setting (on or off). red_gain Returns red gain as an integer (0 to 255). -
Page 72: Camera Ccu Set
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras camera ccu set Sets the specified CCU (lighting and color) information. Synopsis camera ccu set <param> <value> Options auto_white_balance {on | off} Sets the current state of the auto white balance setting (on or off). -
Page 73: Camera Ccu Scene
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras camera ccu scene Stores the current CCU scene or recalls the specified ccu scene. Synopsis camera ccu scene {recall {factory <1 – 6> | custom <1 – 3>} | store custom <1 – 3>} Options recall factory <1 –... -
Page 74: Camera Standby
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras camera standby Set or change camera standby status. Synopsis camera standby { get | off | on | toggle} Options Returns the camera's current standby state. Brings the camera out of standby (low power) mode. -
Page 75: Streaming Settings Get
Video quality mode selected (preset or custom) >streaming settings get Example IP Custom_Frame_Rate IP Custom_Resolution 1080p IP Enabled true IP MTU 1400 IP Port IP Preset_Quality Standard (Better) IP Preset_Resolution 720p IP Protocol RTSP IP URL vaddio-roboshot-hd-sdi-stream IP Video_Mode preset > Returns the current streaming settings. -
Page 76: Network Ping
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras network ping Sends an ICMP ECHO_REQUEST to the specified IP address or hostname. Synopsis network ping [count <count>] [size <size>] <string> Options <count> The number of ECHO_REQUEST packets to send. Default is five packets. <size>... -
Page 77: System Reboot
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras system reboot Reboots the system either immediately or after the specified delay. Note that a reboot is required when resetting the system to factory defaults (system factory-reset). Synopsis system reboot [<seconds>] Options <seconds>... -
Page 78: History
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras history Returns the most recently issued commands from the current Telnet session. Since many of the programs read user input a line at a time, the command history is used to keep track of these lines and recall historic information. -
Page 79: Help
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras help Displays an overview of the CLI syntax. Synopsis help Example help exit Ends the command session and then closes the socket. Synopsis exit Example exit... -
Page 80: Rs-232 Serial Command Reference
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras RS-232 Serial Command Reference ® The Vaddio RS-232 Serial Control Protocol is similar to the Sony VISCA command set in order to be compatible with several popular control devices. Not all VISCA commands are supported, and there are Vaddio-specific commands in the following command and inquiry lists. - Page 81 Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Command Set Command Command Packet Comments Pan-TiltDrive 8x 01 06 01 vv ww 03 01 FF vv= Pan speed (01h-18h) ww=Tilt speed (01h-14h) Down 8x 01 06 01 vv ww 03 02 FF Left 8x 01 06 01 vv ww 01 03 FF Right...
-
Page 82: Movement, Zoom, And Focus Inquiry Commands
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Command Set Command Command Packet Comments CAM_Memory Reset 8x 01 04 3F 00 0p FF Corresponds to camera preset in Telnet API. Set standard 8x 01 04 3F 01 0p FF p= preset number(0h-0Fh) Set standard 8x 01 04 3F 21 0p FF... -
Page 83: Color And Light Management Commands
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Color and Light Management Commands Command Set Command Command Packet Comments CAM_WB Auto 8x 01 04 35 00 FF Normal auto Manual 8x 01 04 35 05 FF Manual control mode Corresponds to camera ccu set auto_white_balance in Telnet API. - Page 84 Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Command Set Command Command Packet Comments CAM_WD 8x 01 04 3D 02 FF Wide Dynamic Range On 8x 01 04 3D 03 FF Wide Dynamic Range Off Corresponds to camera ccu set wide_dynamic_range in Telnet API. May be unavailable on some cameras.
-
Page 85: Shutter Speed Values (Cam_Shutter)
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Shutter Speed Values (CAM_Shutter) 50/25 Value 60/59.94/30/29.97 fps 0x15 1/10000 1/10000 0x14 1/6000 1/6000 0x13 1/4000 1/3500 0x12 1/3000 1/2500 0x11 1/2000 1/1750 0x10 1/1500 1/1250 0x0F 1/1000 1/1000 0x0E 1/725 1/600 0x0D... - Page 86 Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Iris Values (CAM_Iris) Value Iris 0x11 F1.6 0x10 0x0F F2.4 0x0E F2.8 0x0D F3.4 0x0C 0x0B F4.8 0x0A F5.6 0x09 F6.8 0x08 0x07 F9.6 0x06 0x05 0x00 CLOSED Iris Gain and Gain Limit Values (CAM_Gain) Iris Gain Iris Gain Limit Value...
-
Page 87: Color And Light Management Inquiry Commands
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Color and Light Management Inquiry Commands Inquiry Command Command Response Packet Comments CAM_WBModeInq 8x 09 04 35 FF y0 50 00 FF Auto y0 50 05 FF Manual CAM_RGainInq 8x 09 04 43 FF y0 50 00 00 0p 0q FF pq: Red gain CAM_BGainInq... -
Page 88: Other Inquiry Commands
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Other Inquiry Commands Inquiry Command Command Response Packet Comments CAM_PowerInq 8x 09 04 00 FF y0 50 02 FF y0 50 03 FF Off (standby) Corresponds to camera standby get in Telnet API CAM_IPAddress 8x 09 08 4E 00 00 y0 50 49 50 00 00 00 0p 0p... -
Page 89: Specifications
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Specifications Camera and image ® Image device 1/2.8-Type Exmor CMOS sensor Video Resolutions 1080p/60, 59.94, 50, 30, 25 1080i/60, 59.94, 50 720p/60, 59.94, 50 IP Streaming Resolutions 1080p, 720p, 4CIF, 480p, 640 x 480, 360p, CIF Video Aspect Ratio 16:9 for all resolutions Pan and tilt... -
Page 90: Troubleshooting And Care
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Troubleshooting and Care Use this information to determine whether it's time to call Vaddio Technical Support. Check the Status Light First When the camera doesn't behave as you expect, check the indicator light before you do anything else. -
Page 91: Power/Responsiveness Issues
(Check by finding out if it powers something else, such as a laptop or phone charger.) The camera or its power supply is Contact your reseller or Vaddio bad. Technical Support. The camera never finishes The camera is not receiving enough Use PoE+ instead. -
Page 92: Camera Control And Other Issues
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Camera Control and Other Issues What is it doing? Possible causes Check and correct The camera does not The remote and the camera are not Press the Camera Select 1 button on respond to the remote, but using the same IR channel. -
Page 93: Restoring Factory Settings From The Web Interface
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Restoring Factory Settings from the Web Interface YSTEM PAGE IRMWARE TAB Sometimes it’s easiest to just start over. To restore the original factory settings…click Restore Factory Settings. This will overwrite everything you have customized – custom CCU scenes and presets, soft DIP switch settings, passwords, room labels, and more. -
Page 94: Operation, Storage, And Care
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Operation, Storage, and Care For smears or smudges on the product, wipe with a clean, soft cloth. Use a lens cleaner on the lens. Do not use any abrasive chemicals. Keep this device away from food and liquids. -
Page 95: Compliance And Conformity Statements
(2) This device must accept any interference including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the user’s authority to operate this equipment. -
Page 96: European Compliance
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras European Compliance This product has been evaluated for Electromagnetic Compatibility under the EMC Directive for Emissions and Immunity and meets the requirements for a Class A digital device. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. ... -
Page 97: Warranty And Return Policy
Vaddio Customer Service: Vaddio will test, repair, or replace the product or products without charge if the unit is under warranty. If the product is out of warranty, Vaddio will test then repair the product or products. The cost of parts and labor charge will be estimated by a technician and confirmed by the customer prior to repair. - Page 98 Initial shipments of equipment that are refused upon attempted delivery, for any reason, are subject to restocking charges. The Dealer has up to 60 days from the date of purchase to return Vaddio product for credit for future purchases of Vaddio product only.
- Page 99 Returns must be made in the original Vaddio packaging with all original materials if at all possible. Vaddio products with missing original materials will be billed to the dealer at dealer price.
- Page 100 Repair Charge Estimates: Estimates on repair charges for a specific problem will not be given before an RMA is issued and the actual product has been evaluated by a Vaddio technician. Repair estimates will be given after the repair department receives and evaluates the unit.
-
Page 101: Photo Credits
Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras Photo Credits This manual may include some or all of these photos. European Space Agency (ESA) astronaut Samantha Cristoforetti, a Flight Engineer with Expedition 42, photographs the Earth through a window in the Cupola on the International Space Station By NASA - https://blogs.nasa.gov/ISS_Science_Blog/2015/03/06/women-in-space-part-two-whats- gender-got-to-do-with-it/, Public Domain, https://commons.wikimedia.org/w/index.php?curid=38834990 Carl Sagan, Bruce Murray, Louis Friedman (founders) and Harry Ashmore (advisor), on the occasion of... -
Page 102: Index
38, 42, 68 recalling 68 CCU settings 41-42, 65-67 gain 40-42, 66 ceiling-mounted cameras 9 blue 40, 42 cheat sheet 18, 23, 41-42 iris 41 color adjustment 42 red 40, 42 lighting and image quality 41 Vaddio IR Remote Commander 18... - Page 103 Complete Manual for RoboSHOT HD-SDI and SDI Professional A/V Presentation Cameras gamma setting 40-41 enabling/disabling 68 getting help 36 location 5 guest access 30 meaning of colors 17, 85 lighting settings 39-40, 59, 66-68 locations of connectors 6-7 HDMI resolution, setting 10 log files 36 Help page (web) 36 login 21-22...
- Page 104 (low-power) state 58, 69 quantization (IP streaming setting) 47 start-up behavior, setting 37 quick reference 18, 23, 41-42 static IP address 25, 27-28 Vaddio IR Remote Commander 18 status light 5, 17, 57, 68, 85 web interface 23 color scheme 57 enabling/disabling 68...
- Page 105 URL, RTSP streaming 48 USB streaming 44 user login 21, 30 changing 30 default 21 Vaddio IR Remote Commander 18 variable bit rate (IP streaming setting) 47 version, firmware 73 video mute 58 video resolution 10 VISCA commands 75, 77-78, 80-83 voilà, a small cat 87...
- Page 106 ©2019 Legrand AV Inc. Vaddio is a registered trademark of Legrand AV Inc. All other brand names or marks are used for identification purposes and are trademarks of their respective owners. All patents are protected under existing designations. Other patents pending.
Need help?
Do you have a question about the RoboSHOT HD-SDI Series and is the answer not in the manual?
Questions and answers