Qseries-Serial Communication(Link Port) - FATEK P5 Series Connection Manual

Connecting PLC to HMI
Within the Link configuration window in FvDesigner:
Under Interface Type select Ethernet
Under Manufacturer select Mitsubishi Electric Corporation
Under Product Series select one of the Mitsubishi FX5U-ENET options. The last part of
the series name (BINARY or ASCII) should be consistent with the Connection Data Code
set in the Ethernet Port for the PLC.
Enter the IP Address that was written into the PLC.
Enter 1025 for the Port.

QSeries-Serial Communication(Link Port)

2.2.8.1 Communication Setting
Item
Signal Level
Baud Rate
Data Length
Stop Bit
Parity
PLC Station No.
Default Setting
RS232/RS422/RS485
115200
7
1
Odd
0
Remark
QJ71C24N Module
69