Table of Contents
Advertisement
9-2. FAILURE MODE RECALL FUNCTION
While p
seconds?
seconds?
NOTE
2. Blinking pattern when the indoor unit is abnormal:
2.5-second OFF
ON
OFF
Repeated cycle
3.Blinking pattern when the outdoor unit is abnormal:
2.5-second OFF
ON
OFF
OBH732C
Blinking at 0.5-
Blinking at 0.5-
second interval
2.5-second OFF
second interval
Beeps
Repeated cycle
Blinking at 0.5-
3-second ON
second interval
No beep
Beeps
Repeated cycle
MSZ-GL06/09/12/15NA
MSY-GL09/12/15NA
1
ceived.
Beeps
Beeps
Repeated cycle
2.5-second OFF
3-second ON
No beep
Repeated cycle
MSZ-GL18NA
MSZ-GL24NA
MSY-GL18NA
MSY-GL24NA
Blinking at 0.5-
second interval
Beeps
Repeated cycle
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the MSZ-GL09NA and is the answer not in the manual?
Questions and answers
**** speed and the vane angle are not responding to the remote control
The speed and vane angle may not be responding to the remote control on the Mitsubishi Electric MSZ-GL09NA due to several reasons:
1. The remote control batteries may be exhausted or incorrectly inserted.
2. The remote control signal may not be reaching the indoor unit due to obstructions or interference from other electronic devices.
3. The unit may not be powered on, or the breaker may be turned off.
4. The horizontal vanes may not be installed correctly.
5. The fan guard may be deformed, preventing movement.
Checking these factors can help resolve the issue.
This answer is automatically generated