Table of Contents
Advertisement
Date Imprint
Include a Date/Time stamp on the photo
image.
Date Imprint
• Off
• Date
• Date/Time
78
Off
Date
Date/Time
Quick Review
This option enables a quick review of the
photos immediately after they are taken.
Each photo is displayed on the LCD based
on the selected time.
Quick Review
There are 4 options:
• Off
• 1 sec
• 2 sec
• 3 sec
Off
1 sec
2 sec
3 sec
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PIXPRO AZ528 and is the answer not in the manual?
Questions and answers
I **** trying to use my Kodak PixPro AZ528 but cannot get the format screen to move. I checked the manual and couldn't find any information on how to get it to move.
How to adjust white balance ?
To adjust the white balance on the Kodak PIXPRO AZ528:
1. Press the button to enter the white balance settings.
2. Use the (▲/▼) buttons to select one of the 8 modes:
- Adjust the K value (1900K~10000K)
- AWB (Auto White Balance)
- Daylight
- Cloudy
3. Press the button to confirm the settings and exit the menu.
This answer is automatically generated
Can't power on unless plugged in
The Kodak PIXPRO AZ528 may not power on unless plugged in due to a battery issue. Possible reasons include:
1. Battery Depletion: The battery may not be holding a charge even though it shows 100%.
2. Incorrect Battery Installation: The battery may not be properly inserted.
3. Battery Failure: The battery could be faulty or degraded over time.
4. Power Save Mode: The camera might be in Power Save Mode, preventing it from turning on normally.
5. Charging Issue: The battery may not be charging properly due to a defective charger or port.
Try fully charging the battery, reinstalling it correctly, and checking if the camera operates with a different battery.
This answer is automatically generated
does the kodak camera AZ528 inprint a date and time on the video
I am getting a message: "Lens obstruction- restart camera". According to the Manuel, I should turn the camera off and restart it. How, that doesn't work. The camera has not been dropped, so I can't understand why there's a lens obstruction. Please advise what can be done.
If your Kodak PIXPRO AZ528 camera displays a "Lens obstruction - restart camera" message and restarting does not resolve the issue, check for any foreign object or debris blocking the lens. Gently inspect the lens area and remove any obstruction. If the lens is jammed, try turning the camera off and on again to reset it. If the problem continues, avoid forcing the lens and seek professional service.
This answer is automatically generated