Related Manuals for REID LIFTING PORTA-DAVIT 500 Series
Summary of Contents for REID LIFTING PORTA-DAVIT 500 Series
- Page 1 ASSEMBLY VIDEO Assembly & Operation www.reidlifting.com Tel: +44 (0)1291 620796 www.reidlifting.com...
-
Page 2: Table Of Contents
No. 1 in lightweight, portable, safe lifting solutions CONTENTS ASSEMBLY INSTRUCTIONS INTRODUCTION • PORTA-DAVIT 500 - Strop Version (standard) CORRECT OPERATION • PORTA-DAVIT 500 - Winched OTHER VARIATIONS • Intended Use • Inspection Prior to Initial Operation • PORTA-DAVIT 350EX •... -
Page 3: Introduction
INTRODUCTION All users must read these operating instructions carefully prior to the initial operation. These instructions are intended to acquaint the user with the PORTA-DAVIT 500 and enable him/her to use it to the full extent of its intended capabilities. The operating instructions contain important information on how to handle the davit in a safe, correct and economic manner. -
Page 4: Correct Operation
No. 1 in lightweight, portable, safe lifting solutions CORRECT OPERATION Maximum Capacity Intended Use The PORTA-DAVIT 500 is designed to lift and lower loads up to its rated capacity. The capacity indicated The PORTA-DAVIT 500 is intended to be used for the on the product is the maximum working load limit lifting of goods or the lifting of persons, or for providing (WLL) or safe working load (SWL) which must not... -
Page 5: Notes For Correct Usage
Attach the load only to the lifting points on the head it may be required to reduce the WLL of the structure. or the lifeline/winch-line If in doubt contact your REID Lifting representative. • Do not allow the load to swing ≃... -
Page 6: Warning
Disclaimer (S.I. 1998 No. 2307). The safety regulations of the respective country for using manual lifting equipment All REID Lifting sockets & extensions have been designed, developed and tested for safe use must be strictly adhered to. with REID equipment and form a key part of the INSPECTION/MAINTENANCE integrity of the total system. -
Page 7: Maintenance/Repair
If detailed information is required on inspection of the sockets specified below (only sockets supplied and test criteria, please refer to your supplier’s by REID Lifting are approved to be used with the technical department. PORTA-DAVIT 500): Please refer to page 19 for the equipment Inspection Record. -
Page 8: Verifying The Installation
Any different or exceeding use is considered Following initial socket installation verification tests incorrect and REID Lifting Ltd will not accept any we do not recommend overload tests for the socket or responsibility for damages resulting from false davit and suggest thorough visual examination only. -
Page 9: Atex - Classification
ATEX - Classification ATEX - Spark Formation If identified with the Marking below, the product meets Increased danger of ignition may emanate from the requirements of Category 3 equipment for use clashing of special material pairings. These are in Zone 2 explosive atmospheres, providing a normal non-corrosion resistant steel or cast iron against level of protection where mixtures of air and gases, aluminium, magnesium or pertinent alloys. -
Page 10: Atex - Inspection, Maintenance & Repair
No. 1 in lightweight, portable, safe lifting solutions LANGUAGE ATEX - Inspection, Maintenance & Repair It is essential for the safety of the user that if this product is re-sold outside the original country of If using the davit in explosive atmospheres, in addition destination the reseller shall provide instructions to the Regular Inspection/Maintenance information for use, maintenance, for periodic examination and... -
Page 11: Assembly Instructions
ASSEMBLY INSTRUCTIONS PORTA-DAVIT 500 - Strop Version NB: Appropriate PPE should be worn: Gloves Protective footwear Hard hat The PORTA-DAVIT 500 and its constituent components are described in the image below. The use of a socket extension is optional and the socket type may vary between a Top Mount, Side Mount, Bridge Mount, Cast In or Resin Bonded, depending on application. - Page 12 Ensure kingpin is fully inserted and the bearing the socket. flange is in full contact with the socket flange. N.B. Fits all REID Lifting socket types: flush mount, top mount, side mount, bridge mount and the PORTA-BASE. Demonstrated using a top mount socket.
- Page 13 Attach chain block to the shackles. Supporting the weight of the jib with the shoulder, select required operating radius and attach tension strap to adjust channel with the adjustment pin. Insert retaining clip through adjustment pin. Check the davit assembly for ease of rotation. N.B.
-
Page 14: Porta-Davit 500 - Winched
No. 1 in lightweight, portable, safe lifting solutions PORTA-DAVIT 500W - Winched The winched option version of the davit has a rigid adjustment channel, with winch plate mounting, which replaces the tension strap on the standard unit and a sheave block, which is attached to the davit head. The PORTA-DAVIT 500W winch version is supplied in two bags. - Page 15 Attach rigid adjustment channel to davit base with Insert retaining clip through adjustment pin. adjustment pin. Position winch on rigid adjustment channel and attach winch with retaining pins and clips. Ensure winch rope is wound correctly. N.B. Please read operating instructions for the winch before use. Tel: +44 (0)1291 620796 www.reidlifting.com...
-
Page 16: Other Variations
No. 1 in lightweight, portable, safe lifting solutions OTHER VARIATIONS Method A - 2 People (Recommended) PORTA-DAVIT 350EX - Extended Operating Radius Assemble PORTA-DAVIT 500 or PORTA-DAVIT 350EX on the floor horizontally adjacent to the The extended operating radius variants of the davit fixed socket position, and attach the chain block have two different components to the standard and slave chain to the shackles... - Page 17 Method B - 2 people (only for Socket Extension 500mm) Insert Socket Extension into socket Assemble PORTA-DAVIT 500 or PORTA-DAVIT 350EX on the floor horizontally adjacent to the fixed socket position, and attach the chain block and slave chain to the shackles Move jib arm in line with upright tube and tighten the retaining strap Rotate the davit into a vertical position adjacent...
-
Page 18: Quality & Safety
ACCREDITATIONS Conformité Européenne (CE) Quality and safety are key themes throughout this document and the REID Lifting ethos. It is with this in REID Lifting’s products have been designed, tested and mind that we have undertaken external accreditations approved (as appropriate) by the Conformité Européenne. -
Page 19: Inspection Record
INSPECTION INSPECTION RECORD * Insert data from serial numbers found on product into table below Product number(s)* A Serial number(s)* B WLL* C Year of manufacture* D Name of user Date of purchase Date of first use Periodic Examination and Repair History Date Inspected by Pass/Fail... - Page 20 All information herein is copyright protected by REID Lifting Ltd. All company and product names are Trade Mark and Trade Name protected and all REID Product IPR is protected under Patents, Patents Pending and/or Design Rights. Printed using environment friendly processes and materials...
Need help?
Do you have a question about the PORTA-DAVIT 500 Series and is the answer not in the manual?
Questions and answers