M-Code (Spindle); Turning Spindle 1 C-Axis Connect/Milling Mode Select; Turning Spindle C-Axis Disconnect/Turning Mode Select - YAMAZAKI MAZAK INTEGREX e Series Programming Manual

3.

M-code (Spindle)

A. Turning spindle start of forward rotation/start of forward rotation/rotation stop
1. Command
Programming format
Function
Code value
s Surface speed (G96)
Spindle speed (G97)
B. Milling spindle start of forward rotation/start of forward rotation/rotation stop
1. Command
Programming format
Function
Code value
s Spindle speed
C.

Turning spindle 1 c-axis connect/milling mode select

1. Command
Programming format
Function
D.

Turning spindle C-axis disconnect/turning mode select

1. Command
Programming format
Function
Serial No. 294060
Ss M203 Turning spindle 1 Start of forward rotation
Ss M204 Turning spindle 1 Start of backward rotation
M205 Turning spindle 1 Rotation stop
Ss M303 Turning spindle 2 Start of forward rotation
Ss M304 Turning spindle 2 Start of backward rotation
M305
Turning spindle 2 Rotation stop
This function code rotates the turning spindle No.1 forward/ backward. (M203/M204)
This function code stops rotation of the turning spindle No.1. (M205)
This function code rotates the turning spindle No.2 forward/ backward. (M303/M304)
This function code stops rotation of the turning spindle No.2. (M305)
Description
Ss M03 Start of forward milling spindle rotation
Ss M04 Start of backward milling spindle rotation
M05
Stop of milling spindle rotation
This function code rotates the milling spindle forward/ backward. (M3/ M4)
This function code stops the milling spindle. (M5)
Description
M200 Turning spindle 1 C-axis connect/Milling mode select
M300 Turning spindle 2 C-axis connect/Milling mode select
This function code connects the turning spindle No.1 to the C-axis
and changes the mode to milling. (M200)
This function code connects the turning spindle No.2 to the C-axis
and changes the mode to milling. (M300)
M202 Turning spindle 1 C-axis disconnect/turning mode select
M302 Turning spindle 2 C-axis disconnect/turning mode select
This function code disconnects the C-axis from the turning spindle No.1
and changes the mode to turning. (M202)
This function code disconnects the C-axis from the turning spindle No.2
and changes the mode to turning. (M302)
5-71
SUPPLEMENT
Unit Setting range
m/min 0 to 99999
feet/min
-1
min 0 to 99999
Unit Setting range
-1
min 0 to 99999
5
Omit
Possible
Possible
Omit
Possible