Dell CMC Technical Specification page 4

See the Chassis Management Controller Version 1.1 User's Guide for
information on configuration and usage of the FlexAddress feature.
Removing the FlexAddress SD card from the CMC
Once the FlexAddress feature is activated, the SD card can be removed, labeled
with the chassis service tag, and stored safely.
1 Press in the CMC release latch on the handle and rotate the handle away from
the module front panel. Slide the CMC module out of the enclosure.
NOTE:
Electrostatic discharge (ESD) events can harm electronic components inside your
equipment. Under certain conditions, ESD may build up on your body or an object, and then
discharge into another object, such as your CMC. To prevent ESD damage, you should
discharge static electricity from your body before you interact with any of your equipment's
internal electronic components.
2 Locate the SD card slot on the bottom of the CMC module and push down
on the card until a click is heard to release it, and pull the card from the slot.
3 Slide the CMC module into the enclosure. Reattach any cables that were
disconnected.
Using Wake-On-LAN with FlexAddress
When the FlexAddress feature is deployed for the first time, it requires a power-
down and power-up sequence on the server module for FlexAddress to take
effect. FlexAddress on Ethernet devices is programmed by the server module's
BIOS. In order for the server module's BIOS to program the address, it needs to
be operational which requires the server module to be powered up. Once the
power-down and power-up sequence completes, the FlexAddress feature is
available for Wake-On-LAN (WOL) function.
____________________
Information in this document is subject to change without notice.
© 2008 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade
names other than its own.