Bluetooth Stereo Device Pairing; Bluetooth Gps Navigation Pairing - Sena 20S EVO Manual

5.3 Bluetooth Stereo Device Pairing

1. If the Bluetooth stereo device is integrated with the mobile phone
such as smartphones, you don't need to pair the 20S EVO with it
separately. When the 20S EVO is paired with the mobile phone, it
is also paired as a stereo music device.
2. If you have a stand alone Bluetooth stereo device, follow the
pairing procedure separately. The procedure is the same as the
procedure in section 5.1, "Mobile Phone Pairing".
Note:
1. If Bluetooth connection between the headset and a mobile phone is
disconnected, tap the Phone Button to recover the Bluetooth connection
immediately.
2. If Bluetooth connection between the headset and a media player is
disconnected, press the Jog Dial for 1 second to recover the Bluetooth
connection and play.

5.4 Bluetooth GPS Navigation Pairing

5.4.1 GPS Pairing
1. Turn on the headset and press the Jog Dial for 6 seconds until the
red LED is rapidly flashing and you hear multiple beeps.
2. Within 2 seconds, tap the Phone Button and hear the voice prompt,
"Second mobile phone pairing". Again within 2 seconds, tap
the Phone Button and the LED turns to green flashing and the
beeps turn to multiple mid-toned beeps. You will hear the voice
prompt, "GPS pairing".
3. Search for Bluetooth devices on the GPS navigation screen.
Select the 20S EVO in the list of the devices detected on the GPS.
4. Enter 0000 for the PIN.
5. The GPS confirms that pairing has completed and the 20S EVO
is ready to use. You will hear a voice prompt from the 20S EVO
saying "Your headset is paired".
6. If the pairing process is not completed within three minutes, the
20S EVO will return to stand-by mode.
Note:
If you pair your GPS device via GPS Pairing, its instructions will not interrupt
your intercom conversations, but overlay with them.
20S EVO
21