Http Client - Panasonic FP Web-Server2 Hardware And Configuration Manual

Chapter 11

11.1 HTTP client

HTTP GET:
FP Web-Server V2.810 EN
The FP Web-Server is able to act as a HTTP client. Two http request
standard methods are supported: HTTP GET and HTTP POST.
The FP Web-Server sends a HTTP GET request to the HTTP server. The
HTTP server sends its response to the request to the FP Web-Server. If the
FP Web-Server receives a response, it will write the response to the PLC. If
no response is received, an error flag will be set.
Possible applications are for example:
 Read files (e.g. logfiles) from the own expansion unit (using the FP
Web-Server's own IP address or 127.0.0.1) .
 Read files (e.g. logfiles) from an external HTTP server.
 Read PLC data from an external FP Web-Server.
 Find out your external IP address (dynamical IP addresses) by sending
a GET request to e.g. http://my.ip.fi/ or http://ifconfig.me/ip.
 Set PLC internal flag bits or PLC outputs by sending a GET request.
HTTP client
HTTP client
75