Advertisement
1
50°
Trouble shooting
GB
Vianmääritys
Problemløsning
FI
DK
problemas
Resolução de problemas
PT
livewell.honeywell.com
32305352-003 Rev_A
2
40°
Fehlerbehebung
Dépannage
DE
FR
Risoluzione die problemi
IT
Αντιμετώπιση προβλημάτων
GR
3
Probleemoplossing
NL
Solución de
ES
Felsökning
SE
Advertisement
Need help?
Do you have a question about the DC311 Series and is the answer not in the manual?
Questions and answers
My door bell started to ring constantly. Stopped it by removing batteries but now it only rings once not twice as it did previously. What’s wrong ?
The Honeywell DC311 Series doorbell may only ring once instead of twice due to the following possible reasons:
1. Battery Issues – If the CR2032 batteries are weak or improperly installed, the doorbell may not function correctly. Try replacing the batteries.
2. Programming Settings – The doorbell may be set to a single chime sound instead of multiple rings. Check the chime settings and adjust if necessary.
3. Interference or Range Issues – If the doorbell button is too far from the receiver or there is interference, the signal may not be received properly.
4. Installation Problems – Ensure the doorbell and receiver are correctly installed and positioned as specified in the manual.
Check these factors to resolve the issue.
This answer is automatically generated
How do I change the ringtone on DC3111xx
To change the ringtone on the Honeywell DC311 Series, follow these steps:
1. Press the ringtone selection button on the doorbell.
2. Cycle through the available ringtones: Hello, Ding Dong, Westminster, Marimba, Piano, Bell, Telephone, and Soft Alert.
3. Stop pressing the button when you hear the desired ringtone.
This will set the new ringtone for the doorbell.
This answer is automatically generated