Configuring; Description Of The Gx Soft Program - Satel GSM-X Manual

SATEL
Fig. 15. Installing the GSM-X-ETH module on GSM-X module electronics board.

7. Configuring

You can configure all the module settings by using a computer with GX Soft program
installed. Communication between the computer and the module can take place locally (via
USB port) or remotely (via GPRS or, optionally, via Ethernet).
Module with factory settings can only be programmed locally. Remote programming is only
possible after settings for communication via GSM/GPRS (see p. 27) or Ethernet (see p. 29)
are configured. Communication between the program and the module is encrypted.
Having programmed the SMS control commands in the module (see "SMS/DTMF control"
p. 46), you can configure some working parameters of the module by using SMS messages.
7.1

Description of the GX Soft program

In the WINDOWS VISTA or WINDOWS 7 system, provided the size of fonts and other
screen elements is increased, the GX Soft program will be displayed correctly, if the
"Use Windows XP style DPI scaling" option is disabled (the option is available when
configuring the screen settings in the "Custom DPI Setting" window).
Access to the program can be password protected (see ""Configuration" window" p. 22).
GSM-X 17