Table of Contents
Advertisement
Switch
Mount the switch harness in the switch hole provided on the side of the fuselage near the
receiver (on the opposite side to the exhaust/pipe), ensuring free movement of the
switch.
Engine mounting
nstall engine onto the pre-drilled engine mount and secure with self tapping allen key
I
screws. Attach the throttle wire arm using the plastic snaplink supplied.
WEST EUROTECH V1 .50 ABN In
excess of
2.8BHP @ 21,500RPM
TUNED PIPE/MANIFOLD
AND SPINNER
(Spinner supplied for £6.95)
Also available for noise sensitive sites the Genesis mini pipe
If you have purchased the engine and kit package mount the tuned pipe to the fuselage
using the supplied mount and tiewrap, you should use a 4mm bolt and washer to fix the
pipe mounting to the fuselage (over the pre-installed reinforced area of the fuselage).
Join the pipe using the West moulded silicone joiner and tiewraps provided.
Advertisement
Table of Contents
Need help?
Do you have a question about the MAGNUM R and is the answer not in the manual?
Questions and answers