Handset Setting - Hitachi L3200 Manual

Handset setting

Baby call
With baby call function turned on,
you cannot make any outside call
call except to a number you have
programmed in, when you press
any digital key, the programmed
number will be dialed automatically
To enter baby call mode
Press LEFT key and UP/DOWN
button to the location HANDSET;
Select <Baby call> under
HANDSET;
Select <Enable> under Baby
call mode;
Press LEFT key confirm, then
the display shows Babycall Mode
Note: you must set the Baby call
number before enable Babycall
...........................................................................
...........................................................................
To exit baba call mode
In babycall mode, press LEFT
key, the display shows "press
"QUIT" quit BC code"
Then press RIGHT key to exit
baby call mode.
To set the baby call number
Press LEF key and UP/DOWN
button to the location HANDSET;
Select <Baby call> under
HANDSET;
Then select <Set Num> under
BABY CALL
Press LEFT key to confirm, and
key in the number
Then press LEFT key to
confirm
Note: You cannot set Baby call
n umber at BC mode.
To set External/Internal Ringer
To modify (change) the baby
Volume(1-5level)
call number
See step 1-3 above, then to
the location Set Num
Press LEFT key to go to the
stored number
Then press RIGHT key to clear
the stored number, and key in
the new number
Press LEFT key to confirm
To set wall paper
Select<Wall paper> under
HANDSET mode
Press LEFT key to confirm,
and press UP/DOWN button
to scroll through the pictures
Choose the picture you prefer,
then press LEFT key to view
the picture,
Press LEFT key to confirm,
now the picture is set as the
wallpaper of the handset.
Select<Ringer set> under
HANDSET mode
Press LEFT key to confirm,
then UP/DOWN button to the
location ExternalVo/InternalVo
Press LEFT key and UP/DOWN
button to choose the volume
level you want to set
Then press LEFT key to
confirm the choise
Page 12