Download
Share
Print this page
Belleze 014-HG-PH00 Owner's Manual
  1. Manuals
  2. Brands
  3. Belleze Manuals
  4. Patio Heater
  5. 014-HG-PH00
  6. Owner's manual

Belleze 014-HG-PH00 Owner's Manual

48000 btu stand patio heater
Hide thumbs Also See for 014-HG-PH00:

Advertisement

Quick Links

See also: Owner's Manual
R
Owner's Manual
48000 BTU Stand Patio Heate
014-HG-PH00
FOLLOW US:
BELLEZE
R
R
US
CONTACT INFO:
www.bellezefurniture.com
(949) 344-2588
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. If odor continues, keep away from the appliance
and immediately call your gas supplier or fire
department.
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance. An LP-cylinder not connected for use shall
not be stored in the vicinity of this or any other
appliance.
WARNING:
DANGER
Improper installation, adjustment, alteration, service
or maintenance can cause property damage, injury or
death. Read the installation, operation and
maintenance instructions thoroughly before installing
or servicing this equipment.
NOTE:
ANS Z83.26-2014 • CSA 2.37-2014 Gas-Fired Outdoor Patio Heaters
DANGER
WARNING
For Outdoor Use Only
CARBON MONOXIDE HAZARD
This appliance can produce
carbon monoxide which has
no odor. Using it in an enclosed
space can kill you. Never use this
appliance in an enclosed space
such as a camper, tent, car or
home.
WARNING

Advertisement

loading
Need help?

Need help?

Do you have a question about the 014-HG-PH00 and is the answer not in the manual?

Questions and answers

Related Manuals for Belleze 014-HG-PH00

Summary of Contents for Belleze 014-HG-PH00

  • Page 1 Read the installation, operation and maintenance instructions thoroughly before installing 48000 BTU Stand Patio Heate or servicing this equipment. 014-HG-PH00 FOLLOW US: CONTACT INFO: NOTE: ANS Z83.26-2014 • CSA 2.37-2014 Gas-Fired Outdoor Patio Heaters www.bellezefurniture.com...

  • Page 2: Table Of Contents

    We are committed to making decorating your home easy, affordable and fun. Everything you need to make your house into a beautiful home can be found at Belleze. So whether you shop by website or catalog, you can be sure you will always find top-quality merchandise for your home.
  • Page 3 DANGER If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. If odor continues, keep away from the appliance and immediately call your gas supplier or fire department. WARNING Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

  • Page 4: Package Contents

    PACKAGE CONTENTS PACKAGE CONTENTS Reflector Panel Reflector Plate Reflector Stud Head Assembly Cylinder Housing Upper Pole Lower Pole Gas Hose Support Bracket Base Wheel Kit Regulator www.bellezefurniture.com...

  • Page 5: Hardware Contents

    HARDWARE CONTENTS (SHOWN ACTUAL SIZE) HARDWARE CONTENTS (shown actual size) Stainless Flange Flange steel bolt Bolt Qty. 9 Qty. 4 Reflector Bolt Qty. Qty. 2 Qty. 9 spacer Qty. 5 Qty. 3 Qty. Wrench Cap nut Wing nut Screw Qty. Qty.

  • Page 6: Safety Information

    SAFETY INFORMATION SAFETY INFORMATION DANGER DANGER paper or cardboard, a safe distance away from the combustion appliances produce carbon monoxide heater as recommended by the instructions. (CO) during the combustion process. This product is designed to produce extremely minute, non-hazardous into the combustion chamber.
  • Page 7 SAFETY INFORMATION SAFETY INFORMATION WARNING WARNING California Proposition 65 Combustion by-products produced when using is invisible, odorless, and flammable. An odorant is this product contain chemicals known to the State normally added to help detect leaks and can be of California to cause cancer, birth defects, and other reproductive harm.

  • Page 8: Assembly Instructions

    ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 1. Attach wheel assembly (I) to base (H). Line up holes in wheel bracket with corresponding holes in base, insert two bolts M8 x 16 (BB) through holes, and finger tighten Fill sand two M8 flange nuts (AA).
  • Page 9 ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 4. Install post onto three support brackets. Attach post to support brackets using six bolts M6 x 30 & six flange nuts. Fully tighten all of the screws. Hardware Used M6 Flange nut Bolt M6 x 30 5.
  • Page 10 ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 7. Load head assembly by inserting hose into post. Insert head assembly into post. Control knob should be above decal on post. Attach head assembly to post, and loosely install four stainless steel bolts. Tighten bolts securely. 8.
  • Page 11 ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 10. Slide reflector plate onto reflector panels. Insert one screw M6 X 10 (II). Slide one washer over threaded end of screw M6 X 10 (II) and screw on cap nut (JJ) loosely. Repeat procedure to complete the assembly of all four sections.
  • Page 12 ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 11. Connect hose and regulator to cylinder. The propane gas and cylinder are sold separately. Use a standard 20 lb. propane cylinder only. Use this heater only with a propane vapor withdrawal supply system. See chapter 5 of the standard for storage and handling of liquefied petroleum gas, ANS /NFPA 58.
  • Page 13 ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS A dented, rusted or damaged propane cylinder may be hazardous and should be checked by your cylinder supplier. Never use a propane cylinder with a damaged valve connection. The propane cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders of the U.S.

  • Page 14: Operation Instructions

    OPERATION INSTRUCTIONS OPERATION INSTRUCTIONS Leak Check WARNING leak tested and do not leak. Hose / Regulator Regulator / Cylinder connection connection 1. Make 2-3 oz. of leak check solution (one part liquid dishwashing detergent and three parts water). 2. Apply several drops of solution where hose attaches to regulator. 3.
  • Page 15 OPERATION INSTRUCTIONS OPERATION INSTRUCTIONS DANGER Caution: Do not attempt to operate until you have read and understand all General Safety Information in this manual and all assembly is complete and leak checks have been performed. Note: This heater is equipped with a pilot light that allows for safer startups and shutdowns. Pilot must be lit before main burner can be started.
  • Page 16 OPERATION INSTRUCTIONS OPERATION INSTRUCTIONS 5. Push and release the igniter button until pilot flame is visible through viewing hole. 6. Once the pilot is lit, continue to depress the control knob for 30 seconds. 7. If the pilot does not stay lit, repeat steps 4 to 6. 8.
  • Page 17 OPERATION INSTRUCTIONS OPERATION INSTRUCTIONS WARNING FOR YOUR SAFETY Be careful when attempting to manually ignite this heater. Holding in the control knob for more than 10 seconds before igniting the gas will cause a ball of flame upon ignition. When heater is ON: Emitter screen will become bright red due to intense heat.
  • Page 18 OPERATION INSTRUCTIONS OPERATION INSTRUCTIONS 9. Heater is away from gasoline or other flammable liquids or vapors. 10. Heater is away from windows, air intake openings, sprinklers and other water sources. 11. Heater is at least 24 in. on top and at least 36 in. on sides from combustible materials. 12.
  • Page 19 OPERATION INSTRUCTIONS CARE AND MAINTENANCE Gas odor with extreme yellow tipping of flame. Heater does NOT reach the desired temperature. Heater glow is excessively uneven. Heater makes popping noises. Spiders and insects can nest in burner or orifices. This dangerous condition can damage heater and render it unsafe for use.

  • Page 20: Troubleshooting

    TROUBLESHOOTING TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Cylinder valve is closed Open valve Clean or replace orifice or Blockage in orifice or pilot tube pilot tube Open gas line and bleed it Air in gas line (pressing control knob in) for not more than 1 - 2 minutes or until you smell gas Low gas pressure with cylinder valve...
  • Page 21 PACKAGE CONTENTS PACKAGE CONTENTS Reflector Panel Reflector Plate Reflector Stud Head Assembly Cylinder Housing Upper Pole Lower Pole Gas Hose Support Bracket Base Wheel Kit Regulator Printed in China www.bellezefurniture.com...

  • Page 22: Warranty

    This warranty supersedes and replaces all implied warranties of merchantability and use for particular 5 Cost of packaging and shipping to and from Belleze is not purpose. No representative, employee, or agent of Belleze covered by the warranty unless expressly arranged or any other person is authorized to assume for Belleze any by Belleze.
  • Page 23 FOLLOW US: CONTACT INFO: BELLEZE www.bellezefurniture.com (949) 344-2588...
Save PDF