Recording A Few Seconds In Advance - The Pre-Recording Function - Sony LINEAR PCM RECORDER PCM-M10 Operating Instructions Manual

If the peak level OVER indicator lights
in red when the recording level exceeds
–1 dB, or "
display window, distortion may occur.
Reduce the recording level.
Adjust the
maximum level
of the sound to
about –12 dB.
5
Make other settings for recording, such
as "LIMITER" (page 44), "LCF(Low
Cut Filter)" (page 43), etc., in the menu.
6
To start recording, press
PLAY/ENTER.
N
7
To stop recording, press
34
GB
" appears on the
OVER indication
PAUSE or
X
x STOP.
Recording a few seconds in
advance –
the Pre-Recording function
The pre-recording function allows you to
record sound sources for approximately 5
seconds prior to the point when recording is
actually started.
This is useful for recording during
interviews or when making an open-air
recording so that you will not miss an
opportunity to start recording.
MENU
z REC
N PLAY/
ENTER
x STOP
> FF/ v ,
. FR/ V