Wifi Connectivity - MAG 322 Manual

WIFI Connectivity

If you have the View TV Abroad ​ I N A BOX ​ W IFI dongle, follow these instructions to connect the
BOX to your WIFI network.
1 .​ ​ P lug USB WIFI dongle into the back or front of the BOX. ONLY View TV Abroad provided WIFI
dongles will work on your set top box - If you required the Box to be Wifi Enabled and did not
purchase this then contact us for advice.
2 . Plug power cable into the BOX (please check the is NO LAN Cable connected to the BOX)
3 . When you reach the screen stating ''Page Loading Error'' select system settings
4 . Highlight NETWORK (top left hand corner) and press OK
5 . Select WIRELESS (WiFi), press OK
6. Select AUTO (DHCP), press OK
7 . Several networks may show up in the list. With the arrows on your remote select YOUR
wireless network and press OK.
8 . Using the ARROW DOWN button scroll down to KEY or PASSWORD
⌨
9 . Press the​ button on the remote control (Keyboard button)
10 . Using the virtual keyboard, type in your wireless network password.
⌨
11 . Press the ​ button on you remote to remove keyboard once you have type in your
password.
12 . Scroll to OK, press OK on your remote.
13 . Scroll down to Restart Portal press OK on your remote.
14 . If all has gone to plan the Box will load to a screen with a Yellow Bar going across a Blue
Screen
15. If after you restart you still see the page loading error screen please see if WIFI is now stating
enabled if yes...please reboot the BOX again by removing the power supply and re-inserting the
supply. If the WIFI connection is still showing Disabled/Not Connected please follow the
instructions again ensuring you have entered your routers KEY/PASSWORD correctly. The BOX
should then reboot, connect to the wireless network automatically and launch the TV.
- 5