Table of Contents
Advertisement
sPare Parts
Note! all spare parts are supplied
individually unless stated otherwise.
1663.112
offset connector Kt (x2)
1663.118
Flow Knob assembly
1630.049
Filter / Washer (x2)
1663.117
Flow cartridge
1663.114
thermostatic cartridge
1663.257
Wall mounting Bracket Pack
Optional spare part to allow fixing to stud partition
or unfixed rear entry pipe work.
10
1663.113
non return Valve (x2)
1630.048
outlet connector
1663.116
temperature Knob
assembly
1663.115
temperature stop
assembly
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Atom and is the answer not in the manual?
Questions and answers
HOW TO REMOVE THE EXISTING SHOWER HOSE AND INSTALL A NEW ONE.
To remove and install a new shower hose for the Mira Atom shower:
1. Remove the Old Hose:
- Turn off the water supply.
- Unscrew the existing shower hose by hand or using a wrench if needed. One end is connected to the shower head, and the other to the mixer valve.
2. Install the New Hose:
- Attach one end of the new hose to the mixer valve, ensuring a secure fit.
- Attach the other end to the shower head.
- Hand-tighten both connections and use a wrench if necessary, but avoid overtightening.
3. Test the Installation:
- Turn on the water supply.
- Check for leaks and tighten connections if needed.
For compatible spare parts, the Mira Response 1.25m shower hose (150.58) is available.
This answer is automatically generated