Table of Contents
Advertisement
Available languages
Available languages
SNAP THE MAIN BODY TO THE
NOZZLE ASSEMBLY. THEN
SNAP THE HANDLE INTO THE
MAIN BODY.
6
PLUG IN & CHARGE UNIT UNTIL
THE CHARGE INDICATOR LIGHT
GOES OUT (CHARGING MAY TAKE
UP TO 6 HOURS).
TIP: FOR BEST PERFORMANCE FULLY
CHARGE THE PRODUCT BEFORE FIRST USE.
YOUR VERSA
CORDLESS
TM
VACUUM IS READY TO
CLEAN!
NEED HELP?
Go to dirtdevil.com/support or
contact our Customer Service
Department at (800) 321-1134
8:00 a.m. - 7:00 p.m. EST Mon. - Fri.
Pick up the conversation on...
Facebook.com/DirtDevil
Twitter@DirtDevil
3-IN-1 STICK
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Versa Cordless BD22025 and is the answer not in the manual?
Questions and answers
I have a Dirt Devil Versa. I jammed the roller and the vacuum immediately stopped working. I cleared the roller jam, but the vacuum will not restart.
If your Dirt Devil Versa Cordless BD22025 vacuum won't restart after clearing the roller jam, the thermal protector may have activated due to overheating. Follow these steps:
1. Turn the vacuum off.
2. Empty the dirt cup.
3. Inspect and clear any obstructions in the nozzle opening, dirt cup inlet, and filter.
4. Allow the motor to cool for 30 minutes; the thermal protector will then deactivate.
5. Restart the vacuum.
If the vacuum still does not start after these steps, it may require servicing.
This answer is automatically generated