Connection And Version Information - Actron AutoScanner Plus CP9680 Update Instructions

Hide thumbs Also See for AutoScanner Plus CP9680:

Table of Contents

8. Wait while version information is downloaded from the internet and connection to

the device is established.

Note: Although the device is plugged into a USB port, the software will connect

using a virtual com port.

Note: If Scanning Suite cannot find the device, you will see a "could not connect

to the device" message. If this occurs, try using a different USB port or check

Windows Device Manger to ensure the drivers are properly installed and a virtual

COM port was created for the tool.

9. Once Scanning Suite is connected to the device, a version list will be displayed.

Choose the most recent version and click Next.

Table of Contents

Need help?

Do you have a question about the AutoScanner Plus CP9680 and is the answer not in the manual?