Clean The Compressor And Metal Grille At The Back Of The Appliance; Cleaning The Door Seals; After Cleaning - Miele KFN 28132 D ws Operating And Installation Instructions

Clean the compressor and
metal grille at the back of the
appliance

When cleaning the compressor
and the metal grille, make sure that
cables and other components do not
get ripped off, kinked or damaged in
any way.
The compressor and metal grille at the
back of the appliance (heat exchanger)
should be dusted at least once a year. A
build-up of dust will increase the energy
consumption of the appliance.

Cleaning the door seals


If a door seal is damaged or if it
has come out of the groove, the door
will not close properly and cooling
performance will be reduced.
Condensate will build up in the
interior and this can cause a build-up
of ice.
Do not damage door seals and
ensure that they do not come out of
their groove.
Do not use any grease or oil on door
seals as these will cause them to
deteriorate and become porous over
time.
 Door seals should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
Cleaning and care

After cleaning

 Replace all shelves and accessories
in the appliance.
 Reconnect to the mains and switch
the appliance back on.
 Switch on the Super freeze function
for a while so that the freezer section
can cool down quickly.
 Place food in the refrigerator section
and close the door.
 Place the freezer drawers with the
frozen food back in the freezer
section and close the door.
 When the temperature in the freezer
section is a constant -18 °C or colder
press the Super freeze button to
switch the Super freeze function off.
45